1973 Honda Cb750 Motorcycles for sale in Bozeman, Montana

1-2 of 2

Sort By

Honda : CB 1973 honda cb 750 custom cafe racer brat

Honda : CB 1973 honda cb 750 custom cafe racer brat

$2,400

Bozeman, Montana

Year 1973

Make Honda

Model CB

Category Standard Motorcycles

Engine 750

Posted Over 1 Month

I have a 73 CB750 that has been my ongoing cafe racer project. Titled as a 74, but I decoded the VIN and it's a 73 (reconstructed title, so probably just a goof with the DMV). I rewired and thinned out the electrical for a more minimalist setup, newer style DOHC model regulator/rectifier and no electrical on bars (just starter and key switches under tank and hi/lo switch on back of headlight, no signals or horn). 4 into one custom exhaust, rebuilt and rejetted carbs with pods, new bars, grips, clutch lever and cable, tail light, bar end mirrors, new custom seat (built to remove easily with a single 12mm nut on underside), cleaned out tank, new fuel valve, rebuilt caliper, new front brakes, headlight brackets, fork dust seals, master cyl, brake lines, front wheel bearings. Custom mesh cover over electrical. Front forks have been rebuilt with new oil seals and lowered internally (the correct way). As stated above, it has been down before. The motor has a few cooling fins snapped off. It looked to me like the kick-starter hit them since it was set up wrong (you can partially see them in the right side image of the bike). Mileage unknown, has an aftermarket compact speedo on it. I'd guess mileage is in the 25K area but these things run to 100K with regular maintenance. Carbs could probably be tuned better (as always), but it's running super strong right now and is a blast to ride. I just got it to daily drivable shape. Clear MT title in hand. It's still an ongoing project but it is now in daily drivable shape. Things it needs (in my opinion): Tank paint (I was gonna flat black it) and a small dent repaired if you want. Paint is fine now, but that's just what I was going to do. Wheels need to be polished or blacked out (currently rust on rims and spokes but I was able to polish a section of each wheel easily). Tires (have good tread, but are old and harder) Just started to drip some oil near kickstand. Possibly countershaft seal, but auto chain oiler is more likely. Both are fairly simple fixes. It is not a fast leak, a few drips after each ride. It's such a fun bike and project, but I have a hot rod project now and am trying to clear the garage. Thanks for looking. Although this bike is in good running condition with no issues known other than the ones I have mentioned, it is 42 years old and is modified. Due to the nature of pre-owned vehicles, this vehicle is sold as is without warranty. Inspections are welcome by appointment.

Trim 750 Four

Honda : CB 1973 honda cb 750 cafe racer hot rod custom

Honda : CB 1973 honda cb 750 cafe racer hot rod custom

$10,000

Bozeman, Montana

Year 1973

Make Honda

Model CB

Category Sport Bikes

Engine 836

Posted Over 1 Month

This is an over-done Cafe Racer Honda. Every part of it has been modified to be lighter, faster, or handle better. It's not the usual Honda with the seat removed and a humped tail installed. It makes me tired just thinking of all the things that have been done to it...Here's a start:The front end: A CBR 1000 front fork, triple clamp, and brake assy ( with new EBC rotors ) attached to the original CB 750 hub to fit the 2.5"x17" front spoked rim. 120/70ZR 17 Continantal tire. Aftermarket clip-ons and tapered headset bearings.Stock headlight via custom bracket to accommodate the T-Clamps.Aftermarket grips with Bar end turn signals, run with a digital relayChopped gas tank with flush mount gas capCafe TailModification to frame to hold the oil ( the engine is a dry sump ) under the seat ( triangle area with the big hoses coming out of it )Custom ExhaustCustom Swingarm that holds the 5.5"x17 rear spoked rim with a 180/55ZR 17 great Conti tire. Custom sprocket ( 520 ) gold ChainCustom PegsLighter batteryCBR clutch lever for easier pillEngine: a monster: 836 Honda SOHC with a lightened and balanced crank, shot peened rods, ported head, Cam ( somewhat mild for drivability ) bigger valves, all breathing through 31 mm CR Keihin Carbs and exiting through a Barnett clutch. It makes around 90 RWHP on my dyno, ( A stock 750 makes 48-50 RWHP by comparison on my dyno ) Of course the obvious things like cam chain, primary chains, guides, seals, gaskets, etc were replaced as well, for those of you Honda engine guys. Anyway, its fast and light and needs to turn into a house payment.

Trim K