1985 Husqvarna 250 Motorcycles for sale

2017 Husqvarna TE 250

$2,150

Huntsville, Alabama

NEXT motorcycle has already arrived so this one has to go so I've been told. Alabama title in hand. Bring cash. Best Offer and Open to Trades. 49 State Version (hotter Euro cams) produced in October 1984.Means it is a highly desirable "First Year Finest Kind" model. Honest straightforward original survivor. Totally unabused classic.Extremely reliable rider or the perfect candidate for a full restoration. These are getting harder to find, ESPECIALLY in this unmolested condition.Runs great. Uses no oil. These motors run forever. 250k is fairly common.Fully sorted out. Zero mechanical issues.New Tires and Battery this summer.Has a few cosmetic flaws (after all, it IS 31 years old!)I've had it since July 2014 (4th owner) and the last 21K miles are mine.Contact me via email for more

2016 KTM 1290 Super Duke GT

$850

Pacific Palisades, California

Good condition. This bike always starts easily. I've owned this bike since 1985.

1985 Honda Gold Wing 1200

$3,699

Ontario, California

2009 Honda CRF250R, Mountain Motorsports- 45 Years of Great Customer Service! - Call Mountain Motorsports today at 909-988-8988. Mountain Motorsports has been the place for motorcycle enthusiasts since 1970. We were started and are owned by enthusiasts. We are franchised dealers for Honda, Polaris, Suzuki and Husqvarna. Mountain Motorsports has one of the largest selections of affordable used motorcycles in California. Whether you have good credit or credit challenges we can help you. We take trades and we also will buy your motorcycle or ATV. We are also the #1 Polaris growth dealer in California! We are located at 1025 N Mountain Avenue in Ontario. You can check out more of our deals at *** Add Tax, license and reconditioning on the base price. Bring in or mention this ad for this price. Winning is what the CRF250R does best. Taking top honors in Transworld Motocross 4 times as "250 Four-Stroke MX Bike of the Year". All you have to do is take a look at the specs to know why. It's equipped with the Honda Progressive Steering Damper for improved cornering ability. And it's powered by the race-proven Honda Unicam four-stroke engine. The CRF250R. It's not just a hot MXer, it's a trophy magnet.

1980 Husqvarna 390

$2,250

Chino, California

1980 Husqvarna 390 , For sale: 1980 Husqvarna CR 390. Engine Race Prepped by Up-Tite in 1980, Ported 420 Cylinder, Custom Triple Clamps. Been in storage since 1985, starts easily but needs seals. $2,250.00 Serious Inquiries Only No Test Rides $2,250.00

2012 Kawasaki Ninja ZX™-6R

$7,299

Ontario, California

We have a large selection of used sport bikes including the Suzuki GSXR600, GSXR750, GSXR1000, the Honda CBR600RR and Honda CBR1000RR, the Kawasaki ZX6 and the ZX10 and don’t forget the Yamaha R6 and the R1. We have also used Ducatis and Triumphs.Call Mountain Motorsports today at 909-988-8988. Mountain Motorsports has been the place for motorcycle enthusiasts since 1970. We were founded by enthusiasts and owned and staffed by enthusiasts. We know what you need to ride. We are franchised dealers for Honda, Suzuki, Beta and Husqvarna motorcycles.  We are also franchised dealers for Polaris and Can-am Side by Sides. Looking for Sea-Doo Watercraft? We can help you there as well. Mountain Motorsports has one of the largest selections of affordable used motorcycles in California. We typically have over 250 used units in stock at prices to fit in any budget. Whether you have good credit or credit challenges we can help you. We take trades and we also will buy your motorcycle or ATV. We are also the #1 Polaris growth dealer in California! We are located at 1025 N Mountain Avenue in Ontario. You can check out more of our deals at  *** Add Tax, license, document fee and reconditioning will be added to the base price.The Top Contender in the Middleweight Category Power. Speed. Handling. Dominance. The Ninja® ZX™-6R packs all this and more underneath its 599 cc engine, twin spar aluminum frame and advanced Showa suspension. Whether you're a street rider or a racer, this bike packs the kind of potent strength that will satisfy even the most discriminating enthusiasts. The 2012 ZX-6R carries on the tradition of middleweight dominance – started back in 1985 with the revolutionary ZX600-A1 – to a staggering level. And in today's ultra-competitive 600 supersport market, where technology, racetrack success and streetbike acumen can change dramatically year by year, that's saying a lot. Don't believe us? Then ask the many top-level magazines and web sites that picked the current-spec ZX-6R as Best Middleweight. It was an absolutely dominating 600 shootout performance – and one sure to be replicated in 2012 due to the ZX-6R's track-honed DNA and seamless all-around capability.

Honda : XR XL350 Powroll 403cc Megacycle Cam Al Baker's Pipe XL500 Mugen WORKS Shocks VMX

$1,995

Salem, Oregon

FOR SALE 1977 HONDA XL350 We bought this bike a few years ago from a long time friend. This friend had owned this bike since 1985. Way back in 1985 he set off on a journey to create his own version of Bill Bell's Baja Bullet from the late 1970's. Clean and clear Oregon title. First off was the installation of a 403cc Powroll big bore kit. Also installed at that time was a mild Megacycle cam. While disassembled a brief clean up and smoothing out of the cylinder ports was done. Next was the fitting of a 1980 Honda XR500 carburetor. Well known for running great and good gas mileage. While the bike was apart the frame was cleaned up and any unneeded mounting hardware or tabbing for the OEM air filter box and battery stuff was neatly removed. Frame was professionally painted as Bob was pro-painter and owned his own auto body shop. At this time a custom "Mugen-like" air box was handmade and neatly installed/mounted on this bike. Bob is also a great fabricator. A new Al Baker's XR's Only exhaust pipe was purchased and installed. Still looks good. Sounds great! Header pipe has minor surface rust. While the rear end was apart the frame rails were custom modified for the installation of a at-the-time "modern" 1982 CR480 seat and rear fender section. Eliminating the big heavy XL350 seat and seat lock/helmet holder parts. All street-legal parts including: lights, wireharness, switches ETC were removed and are not included in the purchase of this bike. This bike could be made street legal again with time and effort finding the parts. We'd leave it just like it is though. A de-tabbed Honda XR500 rear swingarmwas mated up to the frame at this time as well. New mounts were made for the install of an UNKNOWN brand chain slider and chain guide. Both slider and guide are intact and in good used shape 1981-ish Honda XR500 front forks and clamps were installed. Increasing suspension travel and dampening. Custom steering stops were added to frame to make the new forks clear the then-new Clarke plastic tank. The Clarke tank now is a bit faded with some discoloration. Some of this fade disappears when you spray shiny stuff on it. We sprayed shiny stuff on it for the pics. You can see some of the stain on the sides though. Petcock currently functions fine. The vent tube nipple on the Clarke cap is broken. New caps are still avail from Clarke. In 1985, new Works Performance shocks were installed at that time too. Shocks are not leaking currently in 2016. Both seem to rebound and dampen nicely. Bike starts are runs well. Makes excellent power. Ideal for Vintage MX, trail riding or perhaps even flat tracking. Instant 2-3 gear wheelies on command. No clutch slipping needed. Brakes work decently well. Could probably use a good cleaning of the drums and shoes. Both still work OK and do not drag or stick when used. Shorty front brake lever decreased leverage and makes the cable pull harder than OEM. Front/rear tires are in good used shape. Mileage unknown. Front and rear rims are clean without dents or damage. Each wheel has 3-4 corroded spokes. Could be cleaned up and detailed with little effort. Front CR480 fender is faded but is not cracked. Rear CR480 fender is in good clean shape. Seat does not have any rips or tears. Foam feels nice and comfy. The aluminum Inter-Am handlebars are in good shape. After market controls work decently well also. The shorty clutch lever makes the clutch pull seem a bit firm. Throttle operates decently. The upper end of the throttle cable housing is separated from the end cap on the housing. Still works OK. Has a SUPER COOL solid aluminum exhaust valve cover with manual decompressor device built it. Cable is hooked up to a lever on the handlebar. All these parts work nicely. This bike was casually trail ridden in the Oregon coastal mountains for several years before being parked. Exact mileage on engine and performance parts is UNKNOWN. Mileage on the speedometer reads 9369. Bob said these meter was purchased at a local salvage yard though. Right before we purchased it Bob removed the top end to inspect for wear. All looked great and was reassembled with new gaskets. Bike starts and runs cleanly. No smoke. No unusual knocks, ticks or smoke, Transmission shifts smoothly. All kickstart parts operate properly too. This is an old bike with a lot of cool parts on it. Lots of time and effort was spent on this bike way back in 1985 to make it what it is. Bob is very meticulous. He was a auto-body paint shop owner and was also known to build custom tube-frames for sand rails. With a couple new fenders, number plates and perhaps that Bill Bell MR250 gas tank you would have quite the vintage racer!!!! Or simply ride and enjoy as-is. This bike does not have any remaining warranty. Sold as-is. With any 39 year old bike you will need to clean/replace/adjust/tune to your specific needs. If you have specific questions please ask them via the ebay message system. Yes we do ship anywhere in the USA 48 states !!!!We are Bill's Motorcycles Plus in Salem Oregon. Award winning, long time "real-deal" Gas-Gas and Husqvarna motorcycle dealer and riders. Oregon Dealer # DM0280.If you have questions please call toll free 1-888-806-1153 and ask for Bill Shipping and crating is available within the USA 48 states. Shipping to your local business with a fork lift or local shipping terminal approx. cost is $250-450 depending on your location and distance from us. Call or ask for shipping quotes, please include your zip code.Please no bidders below +5 current feedbacks. Any new members or zero feedbackers must please call us first to communicate interest and intent to complete payment in case they should win the auction. Zero feedbackers who do not do so will be blocked. On Jan-22-16 at 13:42:14 PST, seller added the following information: CLEAN AND CLEAR OREGON TITLE.

Trim XL350 Baja Bullet