1987 Kawasaki Ninja 250 Motorcycles for sale

1-5 of 5

Sort By

2006 Kawasaki Ninja 250R

2006 Kawasaki Ninja 250R

$2,700

Carlsbad, California

Year 1987

Make Kawasaki

Model Kx 500

Category Dirt Bikes

Engine -

Posted Over 1 Month

1987 Kawasaki Kx 500, KX500 two stroke. One of the most powerful motors ever conceived. Torque for miles with a midrange to scare you and enough up top to make most people go WHOOOOOOA. So much power you could ride all day in any conditions and not need to ever catch the pipe. A truely good machine with a ton of outright power. I cant stop smiling every time I ride this thing. Fully restored with cylinder service and nikasil replating by Racers Toy store. Bottom end- all seals replaced and tolerances verified. Top end ProX Piston and rings (uses the newer 1998-2004 Piston). All Gaskets, Seals and O-rings replaced. Rear Suspension linkage serviced with bearing and bushing replacement. Front Forks, wheel, brakes and triple clamp conversion to 2003 Kx250 inverted forks (no modification to the frame - 0.001 machined(Racers Machine) from the '03 stem to accommodate the '87 top head bearing. Complete Original 1987 front forks, wheel, brakes and triple clamp included in purchase price. $2,700.00

2016 Kawasaki Ninja ZX 14R ABS SE

2016 Kawasaki Ninja ZX 14R ABS SE

$250

South Roxana, Illinois

Year 1987

Make Kawasaki

Model KLR 250

Category -

Engine -

Posted Over 1 Month

This bike was owned by a friend of mine, he was riding it around Wisconsin 8 years ago. it don't run because since he moved it Florida it just sat, needs cleaned up. It needs a lot of attention cosmetically but should be a cheap simple project bike. No title.

2008 Kawasaki Ninja 250R

2008 Kawasaki Ninja 250R

$5,000

Owensboro, Kentucky

Year 1987

Make Harley-Davidson

Model Sportster

Category Sport Bikes

Engine 1,100 cc

Posted Over 1 Month

1987 Harley-Davidson Sportster , 1987 30th Anniversary Sportster,original paint,new tires,Vance and Hines exhaust,new primary cover,fresh chrome on cam cover(original),badlander seat.#17 of only 650 built,1100 engines were only built 2 years.good running condition.Started dual disc conversion,have original single disc legs. $5,000.00

2016 Kawasaki Ninja ZX-6R

2016 Kawasaki Ninja ZX-6R

$800

San Ramon, California

Year 1984

Make Kawasaki

Model KX 250

Category -

Engine -

Posted Over 1 Month

1987 Kawasaki KX250 2 stroke with a Brand new FMF pipe and built in spark arrestor. asking $800 or best offer. I have receipt for new pipe and spark arrestor which were bought specifically to ride this season at the parks and its green sticker until 2017. East coast does not have these requirements.

1987 Yamaha SRX 250T-C

1987 Yamaha SRX 250T-C

$4,000

New York, New York

Year 1987

Make Yamaha

Model SRX 250T-C

Category -

Engine 250 cc

Posted Over 1 Month

hello there here i have a classic might i add [vintage collectors item according to my late mechanic] The Yamaha Srx250 which was Yamaha way of competition with the kawasaki ex250 ninja, this bie was only availible in the United States for a short period of time throw 1986.5-1987 which was when they decided to end the production of this model here in USA; with that being said here is some information on the BikeI am selling.Well on this bike i have done some "restoration"small things to it I have replaced all hoses all around, also a new 90* fuel filter,cleaned the in-tank fuel filter which depending on its condition it will be a reusable unless its in real bad shape then you can always buy a new one although it isnt needed because you can always just replace the outter tank 90*"degree" fuel filter {in other words i am running the bike with 2 fuel filters}, cleaned out the carburatos and piston of all carbon build-up last week using seafoam{i to make sure it was all cleaned i kept doing this until it was clear of white smoke then ran it again just to make sure also let it soak for 72hrs recommended is 24 i went the extra step to really clean it with out a complete carb rebuild}, new bleeder kit, brakeline {flushed out the gunk and to ensure all gunk was out used air compresser to push everything out so its like a new brake line} did the same thing to the master cylinder,new barnett clutch,plates&springs"less then 500miles on them", new suspension up front provided by Progressive less then 800miles on springs along with new EBC rear brakes, less then 150 miles on the new rear which are not OEMspec it is Shinko 712 size 110/90-18 OEM SPECS is 100-90-18 could not find 100 so i went up to 110 size has not been a problem fits well looks nice, currently waiting for weather to get better to do another oil change i do not use synthetic oil because those where not around back then i am using 5w30 not to heavy but not to thin just right, new spark plug, bunch of extra gaskets i purchased for future oil changes, new exhaust gaskets and screws, also removed all the rust from the exhaust used naval gel did a few coates to get it all, found a 3 cracks and 2 holes on the exhaust which I mended up, repainted the exhaust matte black"looks Brand New" (can only put up 4 photos o if interested in this bike you must contact me for more info trying to get most out of the way now), owner before said they took care of the front brakes which i belive the work well dont squeek and stops all the time even before the cleaning of the brakeline and changing fluids, Also owner before me installed HIDs which work wonders at night  just my opinon. put alot into this bike and i dont want to let it go but i must. as you can tell ive put alot of work into it. great starter bike or for a collector or enthusiastic that knows how rare these are. Now a days there are not many of these on the streets every where i go people stop me to complement and ask questions,this is a 4stroke.