- Kawasaki (3)
94 Kx 80 Motorcycles for sale
1-3 of 3
Sort By
Kawasaki : KX Kawasaki KX 80 1997 dirt bike
$850
Pawtucket, Rhode Island
This is an original owner dirt bike. 95 % original right down to the hand grips, graphics and tires air filter, handlebars etc. Very clean original bike. Needs back tire and rear brake pads. It`s the original tires. Fully rideable as is. Starts second kick. Runs super with good compression and great power. No leaks anywhere. Fluids and air filter maintenance always done. No broken plastic. Clutch is great with that new bike feel. Everything is pretty tight. Remember it is a used bike. Radiator straight. Never crashed. Very powerful. The seat is from a `94 kx 80 because the rider liked the seat graphics better. Run with a 4 ounce to gallon gas ratio every time. Trail / woods ridden only. please ask any questions! please make sure you are an experienced rider. Has not had any problems since we`ve owned it. We bought the bike new and have the title. Recommend coming to see the bike before buying. No shipping. Bike is located in Pawtucket RI.
2010 Kawasaki KX 450F
$5,499
Southgate, Michigan
Category -
Engine -
Posted Over 1 Month
2010 Kawasaki Vulcan 900 Custom, Specifications Engine Type: 4-Stroke, Liquid-Cooled, SOHC, 4-Valve Cylinder Head, V-Twin Displacement: 903cc Bore and Stroke: 88 x 74.2 mm Maximum Torque: 58.2 lb.-ft. @ 3,500 rpm Compression Ratio: 9.5:1 Cooling: Liquid Fuel Injection: EFI with dual 34mm Keihin Throttle Bodies (2) Ignition: TCBI with Electronic Advance Transmission: 5-Speed Final Drive: Belt Rake/Trail: 32°/7.2 in. Front Suspension / Wheel Travel: 41mm hydraulic telescopic fork / 5.9 in. Rear Suspension / Wheel Travel: Uni-Track® swingarm, seven-way adjustable spring preload / 4.1 in. Front Tire Size: 80/90x21 Rear Tire Size: 180/70x15 Wheelbase: 64.8 in. Front Brake / Rear Brake: 300mm hydraulic disc / 270mm hydraulic disc Fuel Tank Capacity: 5.3 gal. Seat Height: 27.0 in. Overall Length: 94.7 in. Overall Width: 35.2 in. Overall Height: 44.1 in. Curb Weight: 610.8 lbs. Color: Candy Surf Blue, Candy Persimmon Red Warranty: 12 Months 903CC V-Twin SOHC Engine Smooth and reliable engine tuned to deliver a healthy dose of torque at low rpm Gear-driven balancer allows the use of single pin crankshaft without excessive vibration Rubber-mounted to reduce engine vibration at all speeds Four-Valve Cylinder Head Provides maximum valve area for optimum flow, creating more power and low-end torque Single overhead cam design is simple, lightweight and practical Long intake tracts narrow near the combustion chamber to increase intake flow speed for more efficient filling, increased torque and better low-end response Liquid and Air Cooling Finned cylinders and head and liquid cooling combination make for exceptional thermal control Maintains consistent engine temperatures for long engine life and sustained power Automatic fan helps keep things cool Includes temperature warning light Automatic Cam Chain Tensioner Maintains precise valve timing with practically no maintenance Assures greater reliability Hidden from view to preserve the engine's clean, basic look Dual Slash-Cut Mufflers Big slash-cut mufflers look great and contain emission reducing honeycomb catalyzers Positive Neutral Finder Just lift the shift pedal from first gear at a stop to easily find neutral, every time Electronic Fuel Injection Superb performance and rideability thanks to dual throttle bodies with sub throttles The ECU controlled sub throttles are located behind the main throttle valve, allowing the DFI® system to provide more precise throttle response, similar to a constant velocity carburetor Fine-atomizing fuel injectors produce a fine fuel mist for optimal acceleration, combustion and fuel consumption Belt Drive Lower unsprung weight than shaft drive to improve ride quality and suspension action Efficiently transfers the power to the rear wheel Low maintenance and low noise Double Cradle Frame Very rigid, large-diam
Kawasaki : KXF kxf 250f kx250f kx250f kawasaki 250 no yzf yzf250 yamaha yz honda crf crf250 rmz
$6,500
Blandon, Pennsylvania
$6500 OBO bike is for pick up only with cash please call to talk in person have title in hand - please do not click on buy now cause of so many non paying ebayers - thanks bike is brand new - please no trades at all - no scammers - please only inquire if your serious - I own two companies and don't the time to waste , my number is 908 705 0324 - thanks Model Overview & Specs $6500 OBO also no PA or any state tax - no freight - no prep charges !!! Engine Engine Type Four-stroke single with DOHC and four-valve cylinder head Displacement 249cc Bore and Stroke 77.0 x 53.6mm Cooling Liquid Compression Ratio 13.8:1 Fuel System DFI® with 43mm Keihin throttle body and dual injectors Ignition Digital CDI Chassis Front Suspension 48mm inverted Showa SFF telescopic fork with 40-way spring preload adjustability and 22 position compression and 20 position rebound damping adjustability/ 12.4 in. travel Front Brakes Single semi-floating 250mm petal disc with dual piston caliper Front Tire 80/100-21 Rear Suspension Uni-Trak® linkage system and Showa shock with 9 position low-speed and stepless high-speed compression damping, 22 position rebound damping and fully adjustable spring preload / 12.2 in. travel Rear Brakes Single 240mm petal disc with single-piston caliper Rear Tire 100/90-19 Dimensions Dry Weight Curb Weight: 233.6 lb. Fuel Capacity 1.61 gal. Wheelbase 58.1 in. Ground Clearance 13.0 in. Seat Height 37.2 in. Trail 5.0 in. Rake 28.7 deg. Transmission Transmission Five-speed with wet multi-disc manual clutch Final Drive Chain General Colors Lime Green * Price shown is based on the manufacturer's suggested retail price (MSRP) and is subject to change. MSRP excludes destination charges, optional accessories, applicable taxes, installation, setup and/or other dealer fees. Take a look at the record books and you’ll see that no other 250cc motocross bike in the modern four-stroke era has earned more championship titles in AMA Supercross and Motocross than the Kawasaki KX™250F. The 2014 KX250F's championship-winning technology includes a new Launch Control system, a plug-and-play adjustable ECU, Separate Function Fork (SFF), new motor mounts, revised suspension tuning and an upgraded transmission. Make no mistake, the KX250F is still the dominant player in the 250cc ranks. Ride anything else, and you’ll just be playing catch-up. At a Glance… • Launch Control is a first for the 250 class and increases ability to get good starts, by maximizing available traction • Showa Separate Function Fork (SFF) provides progressive damping force and features 48mm inner fork tubes for rigidity • Dual injector Digital Fuel Injection (DFI®) system • High-rpm engine output extends deep into the over-rev • High-tensile steel front engine mount plates are 29% thinner than last year’s steel plates and offer a better mix of chassis rigidity, improved feedback and superior front-end grip • Transmission gears feature four dogs instead of three, for enhanced shift smoothness • Shift-fork grooves are more-direct to enhance feel at the shift lever • Counter-shaft and sprocket retainer design now uses a nut and washer instead of a clip, for a more positive sprocket –to– countershaft interface and simplified sprocket swaps • Upgraded crankcase oil jet delivers an optimized stream of oil to the underside of the piston, for enhanced cooling • Revised throttle body tuning improves airflow from a closed-throttle, for a smoother idle and enhanced low-end response • Revised piston tuning in the left fork leg enhances damping performance through the initial and mid-stroke • Revised rear shock settings provide a more comfortable "baseline" for a wide range of riders • Grips feature shorter barrels and are made from a softer material to enhance rider comfort High-Revving, High Performance Engine • 249cc, liquid-cooled, four-stroke, four-valve, single-cylinder DOHC engine delivers hard-hitting power across the rpm range • Nickel plating on the cylinder wall has a high adhesion factor for optimum durability • Thick-stem connecting rod resists flex and enhances durability • Upgraded crankcase oil jet delivers an optimized stream of oil to the underside of the piston, for enhanced cooling • Thick crank web design features a balance factor on par with the factory racers to help minimize engine vibration, provide smooth power delivery and maximize performance in the mid-high rpm range Factory-Style Launch Control System • Launch Control is a first for the 250 class and increases ability to get good starts, by maximizing available traction • Launch Control is activated by pushing a button on the left handlebar while stopped, in neutral, first or second gear • Retards ignition timing in first and second gears, giving the greatest effect within the first few seconds of releasing the clutch • Shifting into third gear automatically deactivates Launch Control Mode and returns the ignition to normal mapping • Particularly effective when chasing the holeshot from concrete starting pads and other slippery surfaces Digital Fuel Injection (DFI) System • Intake tract designed to provide optimal airflow from the airbox into the combustion chamber • Seal between air inlet port and throttle position sensor unit on the 43mm throttle body protects TPS sensor from fuel penetration • Progressive throttle linkage for sharp and precise throttle response across entire rpm range • Simple and efficient system: No battery, fuses or relays • Offers easy engine starting • Helps prevent engine hesitation after landing from jumps and other high-impact situations Bridged Box-Bottom Piston • Piston profile helps increase reliability compared to non-box-bottom design • Light and strong piston shares same design as the factory racers, and a tin plating to optimize its interface with the nickel plating on the cylinder wall • Special finish improves surface lubrication and wear resistance • Short piston pin reduces reciprocating weight Lightweight and Efficient Top End • Intake valve seat material offers increased durability • Ultra-light valves have extremely thin valve stems on par with those found in supersport machines; intake valves feature thick heads for increased strength • Special casting method leaves the intake port surfaces extremely smooth for optimum intake efficiency across the rev range • Silicon-coated head gasket provides excellent sealing Stainless Steel Exhaust System • Head pipe resonator chamber helps boost low-rpm torque • High-volume muffler assembly features a large cross section to keep noise levels at 94 dB while retaining power production • Durable stainless steel construction Efficient Cooling System • Thick radiators are strong and offer excellent resistance to mud buildup while providing superb cooling performance • Cylinder head water jacket routes coolant to the front of the cylinder head for even cooling Transmission and Shifting • Transmission gears feature four dogs instead of three, for enhanced shift smoothness • Shift-fork grooves are more-direct to enhance feel at the shift lever • Clutch cable holder is integrated with the crankcase for accurate feel at the clutch lever • Scavenge oil filter screen can be accessed without splitting the crankcases, facilitating easier maintenance Quick-turning Chassis • The KX250F’s slim and lightweight aluminum perimeter frame helps provide excellent ergonomics and handling • Center of gravity and key dimensions such as swingarm pivot, output sprocket and rear axle locations designed to increase forward drive with minimal rear-end squat Separate Function Fork • 48mm Separate Function Fork (SFF) delivers firm damping response and increased ride comfort • SFF design separates springing and damping functions for less weight, better performance, less stiction and easier adjustability compared to traditional forks • Revised piston tuning in the left fork leg enhances damping performance through the initial and mid-stroke • Super-hard titanium coating on the outer surface of the inner fork tubes reduces stiction and improves suspension action while also helping prevent scratches and tube damage • Friction-reducing Kashima Coat treatment on the inside of the outer fork tubes contributes to smoother suspension action • Wrap-around fork tube guards provide excellent protection for the inner tubes Uni-Trak® rear suspension • Rear shock features dual compression adjustability, allowing high-speed and low-speed damping to be tuned separately • Features Kashima Coat on the inside cylinder wall for reduced friction and smoother suspension action • Revised rear shock settings provide a more comfortable "baseline" for a wide range of riders • Swingarm features tapered hydroformed spars and forged chain adjusters • Uni-Trak® rear suspension linkage system mounts the suspension arm below the swingarm, allowing more rear suspension stroke and precise tuning • Linkage ratios for the Uni-Trak rear suspension match rear shock damping settings to achieve maximum rear wheel traction Rider Interface • Bodywork components offer the rider a slim interface, making it easy for racers to feel comfortable and go fast • Formed using a double-injection molding process, the shrouds offer a slim design • Right side panel passageways help cool the silencer • Flat design of the seat and tank allow freedom of movement • Frame is wider at the ankles to offer better grip and narrows near the bend below the seat to allow a slim riding position • Slim seat features polyurethane designed to be durable • Seat has a slip-resistant top and side surface for good grip when seated and while standing • 50mm wide (front-to-rear) footpegs offer superb grip and feel at the pegs • Clutch cable boot features a large quick adjuster, making it easy for riders to adjust play in the clutch cable while on the fly • Throttle grip has a one-piece collar that provides additional stability during throttle operation • Grips feature shorter barrels and are made from a softer material to enhance rider comfort Factory-style Components • Pushrod-type front brake master cylinder and brake pad material provide strong brake force and enhanced feel • Rear brake pad material offers powerful braking performance • Lightweight black anodized rims are durable and look just like the factory racers • Titanium-coated inner fork tubes minimize stiction and look great • Front and rear petal brake discs help reduce unsprung weight, and the wave shape helps clean the brake pads for more efficient stopping performance • Rear caliper guard protects caliper from damage • Ribless rear hub and butted spokes reduce unsprung weight • Renthal aluminum handlebar is standard equipment • Blue ignition cover plugs and oil filler cap match the blue accents on the factory race bikes • Factory-style graphics complement the KX250F’s highly tuned performance Additional Features • Radiator shrouds and side panels provider a slim rider interface and a nimble feel • Embossed design on clutch cover • High-density chain pad on top of the swingarm is more resistant to wear • Large resin skid plate offers great protection with minimum weight Optional Accessories • Optional DFI Calibration Kit allows custom tuning • Optional FI Indicator Light allows the DFI system to communicate diagnostic information • Optional engine parts include magneto rotors with different inertias and a 12-tooth output sprocket • Optional chassis parts include handlebar holder for a 1 1/8-inch handlebar, 46 to 50-tooth aluminum and steel rear sprockets, solid petal brake rotors, different fork and shock springs and manual decompression lever and cable Specifications •Engine: Liquid-cooled, four-stroke single with DOHC and four-valve cylinder head •Displacement: 249cc •Bore x stroke: 77.0 x 53.6mm •Fuel injection: DFI® with 43mm Keihin throttle body and dual injectors •Compression ratio: 13.8:1 •Ignition: Digital CDI •Transmission: Five-speed with wet multi-disc manual clutch •Final drive: Chain •Frame: Aluminum perimeter •Rake / trail: 28.7 degrees / 5.0 in. •Front suspension / wheel travel: 48mm inverted Showa SFF telescopic fork with 40-way spring preload adjustability and 22 position compression and 20 position rebound damping adjustability/ 12.4 in. •Rear suspension / wheel travel: Uni-Trak® linkage system and Showa shock with 9 position low-speed and stepless high-speed compression damping, 22 position rebound damping and fully adjustable spring preload / 12.2 in. •Front tire size: 80/100-21 •Rear tire size: 100/90-19 •Front brake: Single semi-floating 250mm petal disc with dual piston caliper •Rear brake: Single 240mm petal disc with single-piston caliper •Overall length: 85.4 in. •Overall width: 32.3 in. •Overall height: 50.0 in. •Wheelbase: 58.1 in. •Ground clearance: 13.0 in. •Seat height: 37.2 in. •Curb weight: 233.6 lbs. •Fuel capacity: 1.61 gal. •Color: Lime Green
