Bultaco 1974 Motorcycles for sale

1974 Bultaco 350 Alpina

$2,000

Bellefonte, Pennsylvania

1974 Bultaco 350 Alpina

1974 Bultaco 350 Alpina

$2,000

Bellefonte, Pennsylvania

1974 Bultaco 350 Alpina

1974 Bultaco Alpina

$800

Oregon City, Oregon

1974 Bultaco Alpina , 1974 Bultaco Alpina 350 Has no spark but turns over with great compression , transmission has all gears, have original Oregon Title. $800.00 5037023388

Bultaco : Sherpa T 1974 bulatco sherpa t 350 vintage trials

$1,300

Oregon City, Oregon

Model 125 1974 Bultaco 350cc 5 speed Trials MotorcycleMatching Frame and Engine NumbersGreat Trials Motorcycle, Akron Rims, New Fenders, New Fender Brace,Gas Tank Repaired, No Leaks, New Front Tire, New Cables,New Levers, New Grips, New Ignition, New Fly Wheel, New Points,New Condensor, Mikuni Carb Cleaned, Bike Tuned Recently,Frame and Gas Tank Painted - Non Pro, Bill of Sale, Starts and Runs Great, Pulls Through All Gears, Some Rust on Forks,All Shipping to be Arranged and Paid For By Buyer.Bike is Located in Oregon City, Oregon 97045

Trim Model 125

Bultaco : ALPINA BULTACO ALPINA 350 MODEL 116 1974

$1,100

Granite City, Illinois

This bike is a numbers matching Bultaco Alpina around 1974 sn is JB11600409 I bought this bike to restore and ride but now I am going to sell it. The guy I bought it from said it ran when he parked it. I tried a few minutes with starting fluid and it would not start for me. It does have good spark. Probably needs rings but I have not took it apart. It has been sitting for about 6 years since it last ran. No title The good:It is a pretty clean original numbers matching bike with a 350 engine. Rarer than the 250 models.It does not have much if any rust.Both tires where new when the previous owner stopped riding it.The rims look pretty good and spin good.Nothing on the outside of the engine is broken the fins look good.It is mostly complete.Still has a metal front fender. The bad:It wont start, I did not spend hours trying so it may with a little more work but I cant promise that.The seat has been reupholstered an ugly brown.Preston petty rear fender.Tank will need sealed. It looks like it seeped a little on the left side. see pictures.No air filter.side covers are not mounted correct I don't know much more than that about it. Again I bought it to be a clean rider but my age and my health are preventing me from riding so it has just sat until now. Make reasonable offer I might accept it. I will help load it for you or your shipper but I will not arrange for any shipping of this bike.

Trim 350

Bultaco : M120 Bultaco Pursang M120 restored 1974 Bultaco

$3,650

Bullhead City, Arizona

For sell a 1974 Bultaco Pursang M120 250cc restored . New parts are as follows new plastics , seat foam and cover , chain , sprockets , tires , tubes , liners , perches , levers , clutch cable and front brake cable , tank restored and sealed , rear spokes , frame painted , side panels restored , new grips . the motor runs great and shifts with no problems . The only thing the bike needs is a silencer . Bill of sale only . I have a friend that transports bikes and comes from Ohio to I40 to San Francisco two times a month costs depends on location . Any question's 928 444 7454 Thanks

Bultaco : 250 Pursang Model 120 Mk-7 1974 bultaco pursang model 120 mk 7 jim pomeroy edition ahrma

$4,500

San Jose, California

1974 Bultaco 1974 Pursang MK-7 Model 120Jim Pomeroy Edition (1st American to win a Grand Prix motocross race) I bought it from a grandma, the original owner Barbara (Bab's) who raced it in the Utah desert a couple of years.As a barn find, it had been sitting in their shop since the late 70's.Although it showed little use-it had a skid plate installed so the frame was perfect. All bolts are the originals with plating the awesome condition. Original Motoplate ignition. I completely restored the bike to keep as part of my collection. Engine: Completely rebuilt by West Coast AHRMA racing legend Pat Brown, who has been rebuilding Bultaco engines since the early 70's. Barrel bored 30 over, new Mahl piston/rings, all new bearings using a needle bearing on one side of the and ball bearing the mod for a more durable rod bearing situation. Pat claimed the transmission gears indicated less use then any engine Bultaco motor he had ever pulled apart! All new: Handlebars, Cables, Barns clutch, brake pads, seat, seat foam, reproduction fiberglass fenders, rebuilt Mikuni, New F-Pipe, air cleaner, power coated frame, Forks rebuilt by Pat, 7.5w Synthetic oil, with new sales, Honda bottom out bushing mod. All aluminum cases, triple clamps etc.. polished out. The gas tank was cleaned & coated with castle tank sealer, the polyester primer applied to the outside, block sanded then given to the Body Shop who used Automotive paint on it, and the new front & side panels.All new grommets. New forged Amal levers, kill switch, and all other rubber pieces available. New NJB shocks 1 inch longer than stock. New Needle headset bearings, new swing arm bushings. since the restoration the bike has only been take up and down the street.However the wheels are off another Pursang, although they were restored with the hubs polished, original double butted SS spooks polished, original Al nipples, they have a dozen short rides on them, but the Perrelli tire show very little wear.This is one the best examples of the 197 pound works Jim Pomeroy Edition MK-7 Model 120. This model was the created with chrome alloy frame & handlebars, shoulderless Ackron rims double butted SS spooks polished, original Al nipples, fiberglass seat base, light weight hubs with chrome plated braking surfaces.These models are becoming very hard to find and are appreciating in value, and they are destined to be one of the top collectible motocross bikes from the golden ERA of motorcross. I moved so it doesn't make sense to pay for storage so I have to sell this bike so I hope someone buys it who will appreciate all my hours of work & the 40+ hours of polishing the aluminum parts alone I have done to create this beauty. Please contact me with any questions.

Trim Jim Pomeroy Edition

Bultaco : Alpina 1974 bultaco alpina 250

$900

Oklahoma City, Oklahoma

Bike still has good compression. Exhaust is not stock. I can crate and ship but must email me with address. I will charge $80 to crate and drop at the carrier of your choice (located in my town).

Trim 250

Bultaco 1973 1974 bultaco pursang mk 7 250

$3,700

Salt Lake City, Utah

THIS 1973/74 BULTACO PURSANG RIGHT HAND SHIFT IS IN GREAT SHAPE IT HAS BEEN GARAGE KEEPED AND WELL MAINTAINED THIS PURSANG RUNS GREAT HAS GREAT COMPRESSION SHIFTS SMOOYH AND FAST THERE ARE A FEW SCUFFS, SCRATCHES AND SMALL DINGS BUT CLEARLY A GREAT LOOKER. IT HAS A SMALL HOLE AND TEAR IN THE SEAT AND IT IS FIRM, COMES WITH TELESCO REAR SHOCKS. THIS WAS RUNNING LAST YEAR BUT FROM SITTING THE CARB SLIDE IS STUCK AND WILL NEED TO BE CLEANED. THIS BIKE WILL MAKE A GREAT ADD TO ANYONES COLLECTION WITHOUT HARDLY AND WORK. BILL OF SALE, I WILL SHIP WORLD WIDE! THANKS FOR LOOKING!

Bultaco 1974 bultaco pursang model 121 numbers matching first time offered

$3,000

Clairton, Pennsylvania

model 121 pursang hard to find been in my collection for over 20 years . unrestored . kept in dry storage in my attic . i rode it when purchased . it has good spark . i left it unrestored as i got it from the original owner. please ask qeustions and look at pictures.big bore maico trades up or down thank you i can crate for 200.00 .if that helps with shipping for you international guys i dont know how to ship to you so you have to do that part but i will help

1974 Bultaco Pursang

$6,000

Johnson City, New York

1974 Bultaco 360 Pursang. Very original condition. Engine is new inside. Piston, liner, rod and main bearings and seals. Tank and owners manual autographed by Jim Pomeroy. Have the original mso.

Bultaco : Metralla Bultaco Metralla model 8 1966

$1,995

Medford, New York

This machine has sat for a few decades in dry storage. It has good spark and excellent kick start compression, perhaps due to a freshening of the piston and rings...[I have some paperwork indicating the purchase of new parts by the previous owner , now deceased] Found nice clean oil in the transmission case. Shifts through the gears readily. There's an original carburator rebuilt by Bultaco West remounted but never gassed. Comes with all new cables. New petcock installed on a solid fuel tank that has some easily removed internal surface rust. The mudguards are not dented or rusted. Has old period Pirelli tires with good tread still holding air on Akront aluminum rims. The dent on the rear wheel is on one side only and the wheel still spins quite un-wobbly... no bent spokes either, but replacement is suggested. New locks with keys were put on the sidecovers when my curiousity got me to remove the old [lost key] locks hoping for treasure.......and found a set of old Hi-test wrenches [made in India] wrapped in an oily cloth. Speedometer needle moves when the wheel turns. Comes with a useable new repro shop manual for a 250 Bultaco, some literature, decals and head gasket. Comes with a transferable registration in my name as New York did not issue titles until 1974. And a bill of sale too. I planned on getting it running and using it occasionally at vintage meets.......but i'm old and loosing my road talent rapidly....and if I fire it up, one of two things will happen. I'll fall into a very dangerous relationship, or I'll bump up the price. In any case, look over the pics, or come by, or send someone knowledgable to see it as it actually does show better than the pictures let on. All questions cheerfully answered. Specific pics? Just ask. The price is $1995. Paid in cash in person, or wire transfer to my bank. Overseas bidders, if purchased, I can deliver to a shipper at New York or New Jersey port from zip code 11763 for an additional $100 US paid to my Paypal account. [a 150 mile round trip thru hell for me] but you are responsible for crating and/or shipping from the port to you. Thank you for looking.

Trim model 8

Other Makes CZ 250 CZ250 Enduro dirt bike MX 988 1 Ahrma motorcycle bultaco vintage 200 SHIP

$999

Salt Lake City, Utah

CZ Vin #988-1-000370 I do not have a title to this bike but will supply bill of sale if you like. I am not sure of the exact year or size, but I am pretty sure it is a 250 enduro mid 70s from the vin#. I have done nothing with this bike and just getting rid off all the bikes I have collected over the years. The top end is locked up from sitting and the bike needs work to get running. The plate on the front is missing and the vin is from the motor. There is a crack in the tank and other things on the bike obviously need work. Great rare old racer to get running or full restoration. Buy It now or best offer, don't wait, when its gone it gone... If you have any questions please ask. I will assist in shipping the bike and I can get you quotes to your location. I can have the bike shipped to Southern California for only $200.00. Deposit must be made within 24hrs auction ends and full balance within 3 days after auction closes. Bike is sold in as is condition with no implied or stated warranties.

1974 Other Makes Falta 1975 CZ 250 Falta, 1974 CZ 250 Falta kit, 4 speed, ahrma, Vintage motocrosser

$3,750

Onalaska, Washington

I have a beautiful 1975/74 CZ 250 Falta. This bike belonged to the Late Don Matthews. Don was a foremost CZ racer and builder in Ahrma and Pacific Northwest vintage motocross scene. He was a friend and a great person. The CZ World Championships ( Don Matthews) is dedicated to his memory. The title has 1974 CZ. The frame has a falta kit and powder coated. Falta top end 4 speed tranny. Works shocks, aftermarket fenders, brake stay/chain guide. It has bing carb and reed valve box. Aftermarket race pipe. I am not a CZ expert at all!! I tried to race it but after 15 years of 4 stroke racing it just doesn't work for me. There has been a lot of good work done to this bike . The piston port work to the cylinder head, down to the rear brake pedal set up. There was a lot of attention to detail on this build. Please ask questions, I race at the expert level and this bike handles great the forks have had work done to then springs and emulators. Please look at the pics they tell a lot more then I can. 500 down payment within48 hours via pay/pal or cash works. Buyer responsible for all shipping and handling arrangements and costs. It has aluminum Falta tank race style seat and cover(new) This is just a top notch bike built buy a top notch man. yz, xr, rm, crf, ktm, vintage motocross, ahrma, yzf, penton, bultaco, 100, 125, 175, 250, 300, 350, 360, 400, 450, 465, 500, cr, kx, Good Luck!

Husqvarna : 250CR 1974 husqvarna 250 mag

$3,750

Bath, New York

1974 Husky 250CR Mag. Look at the photos. Has Pro Fab clamps, Works Shocks, Fresh dent free tank, New tires, newly painted frame and s/arm. Ready to go. I raced the bike a few time. It runs great. Has a new top end with a couple of rides on it. No issues with the bike. This is a Husqvarna -- not a CZ, Maico, Bultaco, Penton, KTM . Buyer responsible for shipping - I can assist - but will not travel too far with the bike. All sales are final - no returns. $500 non-refundable deposit due within 24 hours of auction end. Please ask any questions before bidding. $500 non-refundable deposit due within 24 hours of action end.