Bultaco Pursang 250 Motorcycles for sale

Bultaco : Pursang Bultaco Pursang 250cc model 68

$3,900

Gold Beach, Oregon

Just finished 2 stroke Flat Tracker! 1970 MKIV model 68, frame # B-6801043. The motor out of a model 86 MKV, #M-8600598 is a more powerful engine. The entire motor and drive train are completely rebuilt. Mikuni carb, all new cables, bars, seat, seat pan, and rear fender. Bike is built for racing but has not been raced yet and has only been ridden four or five times with maybe two or three hours on it at the most. This bike is fast and is ready to race! The cylinder and piston are still at original size bore. Intake and exhaust have been ported. Piston skirt has been cut on the exhaust side for performance. Dual plug cylinder head running one spark plug and other hole has compression release for racing. Frame has been powder coated twice, once silver, then again with clear. Super wide billet triple clamps with extra wide lipped wheels with Buchanan stainless spokes. Tires are used but in good condition. New "Progressive" rear shocks. Tank is original and just been sealed. Front forks are original and have been completely rebuilt and polished, they have been lowered for flat track racing.

Trim 68

1977 Bultaco Pursang 1977 BULTACO PURSANG 250 MK-10 192 OSSA MONTESA HUSQVARNA

$6,400

Springfield, Missouri

Nicely restored 1977 Bultaco Pursang MK10 192 with matching frame and engine #'s. Has NOS Pirelli MT-07 rear tire (4.00-18) and MT-07 front tire (3.00-21). Many new parts including OEM plastics, Betor shocks, brake shoes, cables, seat foam, seat cover, sprockets, air filter box, rubber parts, bearings, ect. Engine work by Mobley's (piston, bore, rod and bearing). Bultaco bolts, Motoplat ignition and original Spanish Bing carburetor. Tank on right side has some very faint surface cracks that you have to look at just right. Last pic is some of the parts replaced. Call (417) 536-4424 for questions. I recommend to come by and take a look, located in Springfield MO. 500.00 down by Paypal within 48 hours Balance due within 5 days unless previous arranged. Bike does not have a current title. Had to put clear title above. Will help with shipping arrangements made by purchaser. Also have a 1977 Maico AW 400 on Ebay now as seen in last pic.

Trim 192

Bultaco 1973 1974 bultaco pursang mk 7 250

$3,700

Salt Lake City, Utah

THIS 1973/74 BULTACO PURSANG RIGHT HAND SHIFT IS IN GREAT SHAPE IT HAS BEEN GARAGE KEEPED AND WELL MAINTAINED THIS PURSANG RUNS GREAT HAS GREAT COMPRESSION SHIFTS SMOOYH AND FAST THERE ARE A FEW SCUFFS, SCRATCHES AND SMALL DINGS BUT CLEARLY A GREAT LOOKER. IT HAS A SMALL HOLE AND TEAR IN THE SEAT AND IT IS FIRM, COMES WITH TELESCO REAR SHOCKS. THIS WAS RUNNING LAST YEAR BUT FROM SITTING THE CARB SLIDE IS STUCK AND WILL NEED TO BE CLEANED. THIS BIKE WILL MAKE A GREAT ADD TO ANYONES COLLECTION WITHOUT HARDLY AND WORK. BILL OF SALE, I WILL SHIP WORLD WIDE! THANKS FOR LOOKING!

Bultaco : 250 Pursang Model 120 Mk-7 1974 bultaco pursang model 120 mk 7 jim pomeroy edition ahrma

$4,500

San Jose, California

1974 Bultaco 1974 Pursang MK-7 Model 120Jim Pomeroy Edition (1st American to win a Grand Prix motocross race) I bought it from a grandma, the original owner Barbara (Bab's) who raced it in the Utah desert a couple of years.As a barn find, it had been sitting in their shop since the late 70's.Although it showed little use-it had a skid plate installed so the frame was perfect. All bolts are the originals with plating the awesome condition. Original Motoplate ignition. I completely restored the bike to keep as part of my collection. Engine: Completely rebuilt by West Coast AHRMA racing legend Pat Brown, who has been rebuilding Bultaco engines since the early 70's. Barrel bored 30 over, new Mahl piston/rings, all new bearings using a needle bearing on one side of the and ball bearing the mod for a more durable rod bearing situation. Pat claimed the transmission gears indicated less use then any engine Bultaco motor he had ever pulled apart! All new: Handlebars, Cables, Barns clutch, brake pads, seat, seat foam, reproduction fiberglass fenders, rebuilt Mikuni, New F-Pipe, air cleaner, power coated frame, Forks rebuilt by Pat, 7.5w Synthetic oil, with new sales, Honda bottom out bushing mod. All aluminum cases, triple clamps etc.. polished out. The gas tank was cleaned & coated with castle tank sealer, the polyester primer applied to the outside, block sanded then given to the Body Shop who used Automotive paint on it, and the new front & side panels.All new grommets. New forged Amal levers, kill switch, and all other rubber pieces available. New NJB shocks 1 inch longer than stock. New Needle headset bearings, new swing arm bushings. since the restoration the bike has only been take up and down the street.However the wheels are off another Pursang, although they were restored with the hubs polished, original double butted SS spooks polished, original Al nipples, they have a dozen short rides on them, but the Perrelli tire show very little wear.This is one the best examples of the 197 pound works Jim Pomeroy Edition MK-7 Model 120. This model was the created with chrome alloy frame & handlebars, shoulderless Ackron rims double butted SS spooks polished, original Al nipples, fiberglass seat base, light weight hubs with chrome plated braking surfaces.These models are becoming very hard to find and are appreciating in value, and they are destined to be one of the top collectible motocross bikes from the golden ERA of motorcross. I moved so it doesn't make sense to pay for storage so I have to sell this bike so I hope someone buys it who will appreciate all my hours of work & the 40+ hours of polishing the aluminum parts alone I have done to create this beauty. Please contact me with any questions.

Trim Jim Pomeroy Edition

Bultaco : 192 Bultaco 1977 250 Pursang

$3,200

Northridge, California

Newly powder coated frame and swing arm, new spokes, new inner tubes, new tires, new handle bars, new controls, new cables, new DC fenders and number plates, restored seat and tank, new Mikuni carb, new custom pipe, custom fork springs, new fork seals, new Works Performance shocks, new coil, new clutch plates. Current California title and Green Sticker. I hate to sell this bike but I can't ride do to illness and I need to money. This bike gets a lot of attention and rides great. You will love this bike. Price reduced, Also listing in craigslist so I reserve the right to remove this listing if sold on craigslist first.

Bultaco : 192 Bultaco 1977 250 Pursang

$3,800

Northridge, California

Newly powder coated frame and swing arm, new spokes, new inner tubes, new tires, new handle bars, new controls, new cables, new DC fenders and number plates, restored seat and tank, new Mikuni carb, new custom pipe, custom fork springs, new fork seals, new Works Performance shocks, new coil, new clutch plates. Current California title and Green Sticker. I hate to sell this bike but I can't ride do to illness and I need to money. This bike gets a lot of attention and rides great. You will love this bike.

Bultaco : M120 Bultaco Pursang M120 restored 1974 Bultaco

$3,650

Bullhead City, Arizona

For sell a 1974 Bultaco Pursang M120 250cc restored . New parts are as follows new plastics , seat foam and cover , chain , sprockets , tires , tubes , liners , perches , levers , clutch cable and front brake cable , tank restored and sealed , rear spokes , frame painted , side panels restored , new grips . the motor runs great and shifts with no problems . The only thing the bike needs is a silencer . Bill of sale only . I have a friend that transports bikes and comes from Ohio to I40 to San Francisco two times a month costs depends on location . Any question's 928 444 7454 Thanks

Bultaco : Astro pursang Sherpa S Bultaco Astro Pursang Sherpa S Flat track Drag Hillclimb

$1,600

Joppa, Maryland

Great running Bultaco, model #67, 200cc Sherpa S with Champion glass. Currently set up for Dirt drags and hillclimb. Unbolt the rear extensions, change the tire and you are ready for the short tracks. Typical race wear. Frame could use a coat of paint and the seat needs to be re-covered. Numbers matching bike. $250.00 paypal required within 24 hours and pick up and final cash payment in person within 3 days. I will not ship it. I can help you load it. You can see it in person if you wish. For sale locally and I will cancel the listing if it sells first. Unsure of exact year. Bill of sale only - no title. Miles/hours of use unknown - race bikes have no odometers. Ebay forces you to fill out these fields even when they do not apply.

1977 Other Makes aw400 1977 Maico AW 400 MANY NOS PARTS CZ PENTON BULTACO husqvarna harley davidson

$5,800

Springfield, Missouri

1977 Maico AW400 restored to original with a little extra shine. It would be hard to find one nicer. Lots of NOS parts including OEM Falk fenders and side panels. Correct frame #33004xx and engine #R32324xx. A good original bike to start with will cost $3500+ and all the parts for restoration will far exceed the price of this bike but without all the NOS parts that this bike has. This is a Maico Only restoration for Cycle Parts West in California (out of business). This is a complete restoration of the bike and not just the cosmetics. Call (417) 536-4424 or [email protected] for questions. I recommend to come by and take a look, located in Springfield MO. 500.00 down by Paypal within 48 hours Balance due within 5 days. Bike does not have a title. Had to put clear title above. Will help with shipping arrangements made by purchaser and would recommend Haul Bikes out of Wisconsin.I require 24 hour notice and I will provide a 4 hour window for pick up. I would not recommend U-Ship offered by Ebay due to your bike ending up in a horse trailer or in the bed of a pick up. Also selling a Bultaco MK10 192 Pursang 250 on Ebay now as seen in last pic. I listed these bikes under my wife's account due to Ebay starting to charge me listing fees. I guess they think I'm a dealer. My account is dts-50bmg 100% feedback score of 195.

1977 Other Makes AW 400 1977 Maico AW 400 MANY NOS PARTS FALK PLASTICS PENTON HUSQVARNA

$5,800

Springfield, Missouri

1977 Maico AW400 restored to original with a little extra shine. It would be hard to find one nicer. Lots of NOS parts including OEM Falk fenders and side panels. Correct frame #33014xx and engine #R32324xx. This is a Maico Only restoration for Cycle Parts West in California (out of business) Call (417) 536-4424 for questions. I recommend to come by and take a look, located in Springfield MO. 500.00 down by Paypal within 48 hours Balance due within 5 days unless previous arranged. Bike does not have a title. Had to put clear title above. Will help with shipping arrangements made by purchaser. Also selling a Bultaco MK10 192 Pursang 250 on Ebay now as seen in last pic.

Trim AW