Cr250 1974 Motorcycles for sale

1-15 of 18

Sort By

1974 Honda CR  1974 Honda CR250 Elsinore, Vintage Motocross Bike, AHRMA

1974 Honda CR 1974 Honda CR250 Elsinore, Vintage Motocross Bike, AHRMA

$7,900

Sevierville, Tennessee

Year 1974

Make Honda

Model CR

Category Off Road Motorcycles

Engine 250

Posted Over 1 Month

Up for sale a beautiful classic 1974 CR250 Elsinore. This bike is one of the most collectible vintage bikes ever produced. This Honda has been recently restored and the engine is new from top to bottom. Take a look at the pictures and then get yourself that awesome Christmas present that you never received back in December. I have been restoring a few of these Honda CR250 Elsinores a year and this is the last one that I have. I started a new job in January and I just won't have the time that it takes to build any more of these incredible machines from the glory days of motocross. This bike comes with a Bill of Sale only, I do not have a Title for this off-road only cycle. I will assist the best I can with delivery, however the cost of shipping is the responsibility of the buyer.

Trim CR250 Elsinore

1974 Honda CR  1974 Honda CR250

1974 Honda CR 1974 Honda CR250

$3,500

Puyallup, Washington

Year 1974

Make Honda

Model CR

Category Off Road Motorcycles

Engine 250

Posted Over 1 Month

I have owned the bike for 20 years, rode it about 5 or 6 times. Put a brand new top end in it and haven't rode it since. The bike has not been started in over 5 years. Shown in the pictures the left footpeg mount needs to be welded back to the frame, shouldn't be a problem to have it done professionally, easy fix. The tank is also dented as the picture shows, it's the original tank. The bike is 100% original except for bars and levers, everything else is stock. All other plastics and body parts are in good condition. The bike most likely needs new main seals put in as I couldn't get it to run clean last time I started it. I have an extra frame to go with the bike also.No title, will provide bill of sale.

1974 Husqvarna 250CR Titanium

1974 Husqvarna 250CR Titanium

Request Price

Danbury, Connecticut

Year 1974

Make Husqvarna

Model 250CR Titanium

Category -

Engine -

Posted Over 1 Month

1974 Husqvarna 250CR Titanium, Special construction Hallman Titanium Framed Husqvarna 250CR. Only 168lbs dry. Pro-Fab Triple Trees. Ti Hardware & spokes. NOS Swedish Lyta Aluminum Fuel Tank Built by John LaFevre of Vintage Husky in San Marcos, CA. Entertaining serious offers. Call Dave at 203-730-2453 (x43 or ) or Al at (x39 or ) Thanks for looking and at H-D of Danbury we appreciate your business!!!

1974 Husqvarna 250CR Titanium

1974 Husqvarna 250CR Titanium

Request Price

Danbury, Connecticut

Year -

Make -

Model -

Category -

Engine -

Posted Over 1 Month

1974 Husqvarna 250CR Titanium, This Hallman Titanium Framed Husky weighs only 168lbs dry! Call Dave at 203-730-2453 X43 - Special construction Hallman Titanium Framed Husqvarna 250CR. Only 168lbs dry. Pro-Fab Triple Trees. Ti Hardware & spokes. NOS Swedish Lyta Aluminum Fuel Tank Built by John LaFevre of Vintage Husky in San Marcos, CA. Entertaining serious offers. Call Dave at 203-730-2453 (x43 or ) or Al at (x14 or ) Thanks for looking and at H-D of Danbury we appreciate your business!!!

Honda : CR 1973 1974 honda cr 250

Honda : CR 1973 1974 honda cr 250

$6,900

Salt Lake City, Utah

Year 1974

Make Honda

Model CR

Category -

Engine 250

Posted Over 1 Month

(2) 1973/1974 Honda CR 250s mostly complete except no gas tanks and some other parts. Motors turn over with kick start and feel like they have good compression. Comes with all the parts except gas tank and kx250 side covers not included. Only one silencer included and I'm not sure what other parts besides the gas tanks are missing. Comes with bill of sale as most dirt bikes do not have a title. Sold as is. I tried to take good pictures to show all parts. Ask if needed eight o one five two o four three five one. The motorcycles are in holladay utah 84117

Husqvarna : 250CR 1974 husqvarna 250 mag

Husqvarna : 250CR 1974 husqvarna 250 mag

$3,750

Bath, New York

Year 1974

Make Husqvarna

Model 250CR

Category -

Engine -

Posted Over 1 Month

1974 Husky 250CR Mag. Look at the photos. Has Pro Fab clamps, Works Shocks, Fresh dent free tank, New tires, newly painted frame and s/arm. Ready to go. I raced the bike a few time. It runs great. Has a new top end with a couple of rides on it. No issues with the bike. This is a Husqvarna -- not a CZ, Maico, Bultaco, Penton, KTM . Buyer responsible for shipping - I can assist - but will not travel too far with the bike. All sales are final - no returns. $500 non-refundable deposit due within 24 hours of auction end. Please ask any questions before bidding. $500 non-refundable deposit due within 24 hours of action end.

Husqvarna : CR250 MAG 1974 husqvarna cr 250 mag

Husqvarna : CR250 MAG 1974 husqvarna cr 250 mag

$500

Anderson, South Carolina

Year 1974

Make Husqvarna

Model CR250 MAG

Category Off Road Motorcycles

Engine -

Posted Over 1 Month

1974 HUSQVARNA CR250 MAG FRAME AND SWINGARM. BOUGHT 2 EACH OF THESE TO BUILD A VINTAGE RACE BIKE AND A PRACTICE BIKE. PRACTICE BIKE NEVER GOT BUILT; SO I AM SELLING THE SPARE FRAME AND SWINGARM WITH PARTS SHOWN IN PICTURES. BOTH PIECES ALL ORIGINAL-NOT MODIFIED. FRAME AND SWINGARM HAVE BEEN CLEANED, BLASTED AND POWDERCOATED. READY TO BUILD. THERE IS NO TITLE-BILL OF SALE ONLY. NO TITLE. EBAY REQUIRES ME TO ENTER SOMETHING IN THAT FIELD. NO TITLE-NO TITLE.......

Trim MAG MK13994

2017 Husqvarna FC 250

2017 Husqvarna FC 250

Request Price

Danbury, Connecticut

Year 1974

Make Husqvarna

Model 250CR Titanium

Category -

Engine -

Posted Over 1 Month

1974 Husqvarna 250CR Titanium, Special construction Hallman Titanium Framed Husqvarna 250CR. Only 168lbs dry. Pro-Fab Triple Trees. Ti Hardware & spokes. NOS Swedish Lyta Aluminum Fuel Tank Built by John LaFevre of Vintage Husky in San Marcos, CA. Entertaining serious offers. Call Dave at 203-730-2453 (x43 or ) or Al at (x39 or ) Thanks for looking and at H-D of Danbury we appreciate your business!!!

Husqvarna : 250CR 1974 husqvarna 250 cr complete custom titanium build

Husqvarna : 250CR 1974 husqvarna 250 cr complete custom titanium build

$24,995

Danbury, Connecticut

Year -

Make Husqvarna

Model 250CR

Category -

Engine 250

Posted Over 1 Month

FINANCING AVAILABLE TO THOSE WHO QUALIFY WE WILL ALSO SELL INTERNATIONALLY - CALL US AT THE DEALERSHIP IF YOU ARE INTERESTED! (203-730-2453)SEND YOUR BEST OFFERS! CHECK OUR FEEDBACK - GOOGLE US - ADD US ON FACEBOOK BUY WITH CONFIDENCE DescriptionThis Hallman Titanium Framed Husky weighs only 168lbs dry! Call Dave at 203-730-2453 X43Special construction Hallman Titanium Framed Husqvarna 250CR. Only 168lbs dry. Pro-Fab Triple Trees. Ti Hardware & spokes. NOS Swedish Lyta Aluminum Fuel TankBuilt by John LaFevre of Vintage Husky in San Marcos, CA.Entertaining serious offers.Call Dave at 203-730-2453 (x43 or [email protected]) or Al at (x14 or [email protected])Thanks for looking and at H-D of Danbury we appreciate your business!!! Manufacturer HusqvarnaModel Year 1974Model 250CR TitaniumPrice Request QuoteColor Red / SilverDisplacement 250 ccStock Number 2896Additional Pricing Information Entertaining serious offers on this 168lb Titanium HusqvarnaEngineDisplacement 250 cc STORE HOURSMonday9:00AM - 6:00PMTuesday9:00AM - 6:00PMWednesday9:00AM - 6:00PMThursday9:00AM - 8:00PMFriday9:00AM - 6:00PMSaturday9:00AM - 4:00PMSunday11:00AM - 4:00PM Harley-Davidson of Danbury 51 Federal Road Danbury CT 06810 Phone: (203) 730-2453 Fax: (203) 778-8377 GET THE BEST! – GET YOUR BIKE AT H-D OF DANBURY!Bidders with Negative Feedback, No Feedback or Limted Feedback (three or less Feedback Events) must contact Harley-Davidson of Danbury prior to bidding or your bids will be rejected and canceled.All bidders must be at least 18 years of age.No bid retractions are allowed unless agreed upon in advance by email.When placing a Bid it constitutes a legally binding contract to purchase this motorcycle. Please do not bid if you're not seriously interested or financially able to purchase this motorcycle.Winner must contact seller within 48 hours and complete and pay a $500 deposit via Pay Pal, which must also be initiated and funded within 48 hours of auction ending.IN THE EVENT THAT THE WINNING BIDDER IS IN THE STATE OF CONNECTICUT, APPLICABLE STATE OF CT SALES TAX (6.35%)MUST BE COLLECTED BY H-D OF DANBURY ACCORDING TO CONNECTICUT STATE LAW.A CONVEYANCE FEE ($299) IS ALSO REQUIRED TO BE PAID BY THE WINNING BIDDER/BUYER (in addition to the winning bid amount) REGARDLESS OF WHAT STATE THE WINNER RESIDES IN. This fee covers document preparation and title transfer expenses incurred by the Dealership and any overnight mail charges.Winning bidder pays for shipping. H-D of Danbury can provide the Winner with shipping company contact information to provide for no hassle transportation within the United States and Canada. International bidders welcome!!This motorcycle that you are looking at is also for sale locally, and we reserve the right to remove this listing at any time.

Honda: CR 1974 honda mr 50 elsinore nice vintage mini kids dirt bike z 50 cr cr 60 cr 80 cr 250

Honda: CR 1974 honda mr 50 elsinore nice vintage mini kids dirt bike z 50 cr cr 60 cr 80 cr 250

$1,300

Holy City, California

Year 1974

Make Honda

Model CR

Category Off Road Motorcycles

Engine 50

Posted Over 1 Month

Selling a nice clean vintage 1974 Honda MR50 Elsinore kids minibike. This is a neat little vintage machine that appears to be in great original condition. I dont know a ton about the MR50, but I was told this was all original. Sold with a bill of sale only. Not registered in the state of CA. I bought it to ride back and fourth to my mailbox. I have had it for about 2 years and it runs well. Tank and seat are in great shape for the bikes age. I think its all original, right down to grips, but I am not an expert on the MR 50's. The plastic is in great shape but has normal scuffing from age. Please look closely at the pics. I would not call it mint, but I would call it a very clean rider. Everything is straight, bars, levers, pegs. The brake lever tip is broke off, but its a clean break. This is a cool bike because it is both a two stroke AND it has a working clutch. All the other Honda mini's are four strokes and automatic. This would make a great addition to your collection or use as a pit bike or a rider. The boring stuff (but please read):Shipping: I suggest you use Daily Direct for transport. Their phone number is 888-haulbikes, and they are professionals with a strong track record of moving expensive and nice motorcycles. Daily Direct offers door to door "roll on" and "roll off" service. I can ship anywhere in the USA with Daily Direct for $450. I can and will ship international, but the buyer must coordinate this, as the process can be cumbersome. I will assist as best as possible and do have really good access to shippers to the UK, Europe and Australia. I can also ship to the middle east as well. But please note that all paperwork will be handled by the buyer. I dont do paperwork very well. Seller Notes: If you are a serious buyer and have the money in hand, I am happy to talk to you on the phone about whatever questions or interest you have in the bikes. But please, no time wasters or tire kickers. If you are a serious buyer, it is available to be shown for you or to an agent of your choice. I always suggest you have someone review a bike before buying, but realize it is not always practical, as sometimes matter of opinion on condition can be different. But I am not looking for tire kickers or time wasters. The bike is located in Northern California. Payment: A $500 non refundable deposit is due within 24 hours of closing, or a friendly phone call or clear email on who you are and how you intend to close the deal. I am very easy to work with, but a little clear communication goes a long way with me. We will take payment however is easiest for you for to send, as we understand that some buyers might be out of the country. Cash, bank to bank payment, bank check, Paypal, WU, Carrier Pidgin - whatever - but as long as it clears our bank and you are not playing the Nigerian lottery with me, I could care less how it comes. Just make sure it comes. My bikes are always for sale locally and I reserve the right to end the listing at any time if a local buyer comes forward. In case you are wondering anything about me as a seller, I have been on eBay since 1998 (thats over 16 years) and have not one negative feedback. I am just a nut for older dirt bikes and ATV's from the 1980's. I have a nice collection of bikes that I have built up over 15 years of collecting and messing about. I have several others that I am selling, including several 85 - 86 250r's and 350x's, as well as a 86 200x and a 86 atc250sx. I am clearing out some bikes to make room for other projects, so hit me up if you are interested in one of them.. See my other listings for some more of my stuff, but I doubt I will get around to listing all of them.

Trim Elsinore

Honda : CR 1974 Honda Elsinore cr250m vintage Rolling Chassis #CR250M-1024753

Honda : CR 1974 Honda Elsinore cr250m vintage Rolling Chassis #CR250M-1024753

$675

Phelan, California

Year -

Make -

Model -

Category -

Engine -

Posted Over 1 Month

Up for sale I have a 1974 Honda Elsinore CR250M rolling chassis. Bike is a great start to a full restoration. There are some flaws that need to be fixed which are pictured. The front and rear rims have bends in them and the front rim has a minor crack where the arrows are pointing. The frame on the rear where it is painted blue needs to be fixed, it is cracked all the way through. The front where the engine mounts has a poor weld that needs to be fixed. You can see by the pics what you are gonna get. Bike comes with bill of sale with some misc parts and a couple stickers. Kill switch works it was tested. All other parts on bike are factory stock. WHAT YOU SEE IS WHAT YOU GET. If you have any questions or need more pictures please feel free to contact me and I will get back to you ASAP. All reasonable offers will be considered. SORRY BUT LOCAL PICK UP ONLY. Thanks for looking and have a great day.

Honda : CR 1974 Honda Elsinore cr250m vintage Rolling Chassis #CR250M-1024753

Honda : CR 1974 Honda Elsinore cr250m vintage Rolling Chassis #CR250M-1024753

$675

Phelan, California

Year -

Make -

Model -

Category -

Engine -

Posted Over 1 Month

Up for sale I have a 1974 Honda Elsinore CR250M rolling chassis. Bike is a great start to a full restoration. There are some flaws that need to be fixed which are pictured. The front and rear rims have bends in them and the front rim has a minor crack where the arrows are pointing. The frame on the rear where it is painted blue needs to be fixed, it is cracked all the way through. The front where the engine mounts has a poor weld that needs to be fixed. You can see by the pics what you are gonna get. Bike comes with bill of sale with some misc parts and a couple stickers. Kill switch works it was tested. All other parts on bike are factory stock. WHAT YOU SEE IS WHAT YOU GET. If you have any questions or need more pictures please feel free to contact me and I will get back to you ASAP. All reasonable offers will be considered. SORRY BUT LOCAL PICK UP ONLY. Thanks for looking and have a great day.

Honda : CR 1973 73 1974 74 honda cr 250 m cr 250 cr 250 elsinore vmx ahrma race bike pfr pipe

Honda : CR 1973 73 1974 74 honda cr 250 m cr 250 cr 250 elsinore vmx ahrma race bike pfr pipe

$2,500

Fernan Lake Village, Idaho

Year -

Make Honda

Model CR

Category Off Road Motorcycles

Engine 250

Posted Over 1 Month

I have a CR 250 race bike that has patina yet upgrades to be a great race bike. All original plastic & tank. RM seat (bolts right on & has plastic base) PFR pipe (some race scars but, good), new tires, (Dunlop rear & Kings front), new front shoes & brake cable, fork seals, Renthall bars, straight pull throttle, split perches, K&N filter, folding shift lever, kick lever is tight, mag cover is not cracked. Most fasteners have been changed over to 8mm head Honda bolts. I didn't open up the motor it has great compression & runs hard. It has had rear frame loop removed (fender is solid) and I have a junk frame which could donate rear loop if someone desired. I have a lot of spares which will also be sold for additional cost. (almost 1 1/2 other bikes). Bel-Ray lubricants are used. H1R two stroke at 40:1 & gear saver as well. This is built to RIDE, RACE & ENJOY!! Not a museum piece. I have experience in shipping bikes internationally in various ways so feel free to inquire. Do not bid unless you intend to purchase. There is no buyers remorse. You bid/buy you own it plain & simple. All shipping costs will be based off of the ship to address but, are responsibility of the purchaser . Also there are no warranties unless stated. What you see is what you get so look closely and ask questions. Also, if "time is of the essence" please inquire about how long it'll take me to ship. I make no guarantees other then I'll do it ASAP & usually ship once or twice a week. Sometimes sooner. If you have any questions call or text me at 208-771-0882, Be sure to check out my store!! Be sure to add me to your favorites list! I have a " real " job & only do this on eve's & weekends. So, that being said please realize I have a normal life & it takes time to do things whether it's replying to inquiries or shipping. Also, I state it's shipping & handling which includes supplies, my time etc...... If you don't like my way of doing business don't bid. Very simple really. Thank you, MRSUPERSPORT Check out my other items.

1974 Honda Other  1974 Honda MR50 Elsinore

1974 Honda Other 1974 Honda MR50 Elsinore

$1,875

Clinton, Michigan

Year 1974

Make Honda

Model -

Category -

Engine -

Posted Over 1 Month

1974 Honda MR50 Elsinore A little History on the Honda MR50 Elsinore; It is an off road mini cycle made by Honda. It was manufactured in Japan by Honda and imported first to Australia and the United States in 1974 and continued to be available in the USA, Canada and Australia until production was discontinued in 1975. It was patterned after the CR125 and CR250 Elsinores. Like its big brothers it has spoke wheels, knobby tires, and plastic fenders. The engine was a 49 cc (3.0 cu in), air-cooled, two-stroke with 3 speed manual clutch transmission. Starting is a primary kick on the right side of the bike. The bike used conventional controls just like larger models. The shift pattern is neutral at the bottom and 3 up. Lubrication; premix at 25:1. The exhaust has a spark arrestor. This bike's mechanicals have been restored; with the engine and transmission rebuilt, new clutch, frame sandblasted and powder coated. Wheels have been professionally trued. It runs and shifts as it should. The fuel tank paint is in great original condition. This is a real beauty. You will not be disappointed with your purchase. No Title - Sold with bill of sale This vehicle is sold as is whereas no warranties apply or are implied.

1974 Other Makes Falta  1975 CZ 250 Falta, 1974 CZ 250 Falta kit, 4 speed, ahrma, Vintage motocrosser

1974 Other Makes Falta 1975 CZ 250 Falta, 1974 CZ 250 Falta kit, 4 speed, ahrma, Vintage motocrosser

$3,750

Onalaska, Washington

Year 1974

Make Other Makes

Model Falta

Category -

Engine 250

Posted Over 1 Month

I have a beautiful 1975/74 CZ 250 Falta. This bike belonged to the Late Don Matthews. Don was a foremost CZ racer and builder in Ahrma and Pacific Northwest vintage motocross scene. He was a friend and a great person. The CZ World Championships ( Don Matthews) is dedicated to his memory. The title has 1974 CZ. The frame has a falta kit and powder coated. Falta top end 4 speed tranny. Works shocks, aftermarket fenders, brake stay/chain guide. It has bing carb and reed valve box. Aftermarket race pipe. I am not a CZ expert at all!! I tried to race it but after 15 years of 4 stroke racing it just doesn't work for me. There has been a lot of good work done to this bike . The piston port work to the cylinder head, down to the rear brake pedal set up. There was a lot of attention to detail on this build. Please ask questions, I race at the expert level and this bike handles great the forks have had work done to then springs and emulators. Please look at the pics they tell a lot more then I can. 500 down payment within48 hours via pay/pal or cash works. Buyer responsible for all shipping and handling arrangements and costs. It has aluminum Falta tank race style seat and cover(new) This is just a top notch bike built buy a top notch man. yz, xr, rm, crf, ktm, vintage motocross, ahrma, yzf, penton, bultaco, 100, 125, 175, 250, 300, 350, 360, 400, 450, 465, 500, cr, kx, Good Luck!