Harley Davidson Rigid Motorcycles for sale

2007 Rigid 180

$9,500

Mount Vernon, Washington

2007 RIGID 180, Built right here at Lifestyles Honda in 2007 this bike has a unique look and killer stance. Featuring a factory Harley Davidson motor and transmission it runs killer and looks even better. Priced to sell.

Harley-Davidson : Other Custom Built 1982 Harley Davidson Shovel Head

$22,500

Newtown, Pennsylvania

This bike was originally built by Kundratic Kustoms in Baltimore. I'm attaching some pictures of the original build. Kundratic builds some incredibly clean and functional bikes - he's a craftsman. This bike was on the show circuit with him and may still be on his website. I acquired it from the original owner and just spent nearly $13k on a complete refresh. The bike is built on a Santee rigid frame and the original Harley frame (that matches the motor) goes with the bike. The engine is a freshly rebuilt 88 shovel head built by Andy Simon of Simon's Competition. New pistons, rings, bearings, valves, valve springs, seals, heads ported and polished, three bolt exhaust flanges, S&S carb worked over. Andrews cams. Just a complete freshen-up of the same basic combination the motor has been running for years with a slight increase in displacement. No reason to monkey with a formula that works and runs reliably - its a handful. Just a nasty shovel head that runs really, really well with no issues. Here are few other items included in the recent work: All new cablesAll new brakesNew tiresNew chain, belt and clutch basketNew rear brakeNew hand controlsNew headlightNearly all of the bikes prior polished pieces were chromed - wheels, exhaust, forks, trans plate, brakes, risers, etc., etc.Cases and heads powder coatedEngine cases polished, trans disassembled and polishedFresh paintNew seatProbably missing a bunch of things but the general idea was just to change the color scheme, refresh and rebuild all the major mechanical items and update the whole bike. Not even fully broken in at this point - just shakedown miles and it runs really, really well. Have already changed the oil and tightened up every thing after the first 15 or so miles. My guess from where I've ridden is about 20-25 miles total on the build. You can see there are no odometers or signals to junk up the bike. Devoid of wiring and other unsightly accessories. Lots of custom touches - all custom made oil lines, custom made gas tank, mid controls, internal rear brake line, etc. etc. Think this was originally a $40k plus build. Moving on to my next project so here it is..... Here is a link to a brief video of the bike running: https://youtu.be/30eRo47viXs

Trim Rigid

2003 Harley-Davidson Sportster 883 CUSTOM

$8,900

Pico Rivera, California

I am selling a 2010 Custom Bobber Motorcycle. Perfect for Bar Hopping. It was built on a 1957 Santee replica frame. It has a S&S Harley Motor. Ready to ride. Pictures speak for itself. 562 577-6198 ask for Mike

1972 Harley-Davidson Other OEM Shovelhead chopper bobber, rigid frame, New build

$9,500

Richland, Washington

New build, still being broken in. OEM Shovelhead engine and front frame. All others parts high quality brand new. Engine built to 0.0005 tolerance with less than 1000 miles on it. Parts alone cost over 15k. Powder coated, not paint. Runs great, starts easy. Polished stainless steel nuts/bolts/allens. Upgraded to LED lights, GMA disc brakes, Dyna electronic ignition, Andrews gears, S&S cam and carb, 160 rear tire, AGM battery etc. Has two gas tanks to choose from, metalic red or black flamed. forward controls can be moved to 3 different positions depending on riders size. This is not some backyard build, I have built many bikes that have been on the road for years. Title is clear and registered correctly. For sale locally on CL so I may unpost. Will sell overseas.

Trim Rigid frame

2007 Rigid Harley Davidson

$7,500

Olive Hill, Kentucky

Built in 2007 has 1340 evo motor less than 5,000 miles,nice bike 12,000.00 invested need to sell!

2007 Rigid Harley Davidson

$7,500

Olive Hill, Kentucky

Built in 2007 has 1340 evo motor less than 5,000 miles,nice bike 12,000.00 invested need to sell!

Custom Built Motorcycles : Bobber 1996 harley davidson custom bobber

$7,500

Bradenton, Florida

My 1996 Harley Davidson Custom Bobber. Selling due to a back surgery that is upcoming and my spine would like something more comfortable. It is a 96 HD Sporty, customized. Has 1200cc motorRigid tailPro 1 Tree, with 7 degree rake19" barsCustom mounted oil tank in the frontOil Cooler19" front wheel3100 miles on engineBike is not painted it has been completely powder coated, (frame and tins). The VIN will come back to an 883cc but it does have 1200 jugs, and once ridden easy to tell its a 1200cc. I don't have the documentation to prove its a 1200, other than just ride the bike. Other than that the bike rides great, looks great, and gets on down the road. Just need something that my back likes better. I will consider trading for ONLY these things NOTHING ELSE,A Victory Motorcycle with a 106 motor, (XC, Highball, 8Ball) you get the ideaHarley Road King, or FLHX, Im OK with these being older, Iknow they will be.Trades will be close to value, I won't pay more than my bikes perceived value, but I will go down on trade value, if the bike is what I am looking for, and of course your bike has to run, with little to no work involved. Any other questions or if you would like more pics (tell me the pics you want me to take) , I may post a video of it running if I get the time,, and message me thru here and I will send you a link if I get it done. If your somewhat close to me I can deliver the bike for a few hundred bucks, depending on how far i am going,, would go up or down. Lastly, Some of the pictures are during stages of me putting the touches on the bike,, the main image is how the bike looks now. Some to the pictures my not have the Oil tank in the front, or the 19" bars. But the bike has them now, as you see it in the main image.

Trim Harley Davidson

Custom Built Motorcycles : Chopper Custom 200 Shovelhead Chopper

$16,000

Okotoks, Alberta

Custom 200 Mid-USA rigid frame with rebuilt 80 inch Shovelhead and rebuilt 4 speed trans. New wet clutch, primary chain and drive belt. New Avon rubber 130 front and 200 rear. Remote oil filter kit, custom fit oil tank, electronic ignition, new battery. GMA brakes with new pads and all stainless braided lines. S and S Super G carb with polished aluminum air cleaner. FLH front end with new down tubes and baby apes with internal wiring. Black powder coated pipes, 5 gallon Fat Bob tanks and dash with new speedo, custom seat. Polished aluminum Mid-USA forward controls and master cylinder, rear LED stop/turn/tail lights. All black and chrome, no cartoon paint or logo's. Everything is new or rebuilt with very low miles. Very cool and reliable one of a kind ride. Only selling because I need a new work truck. Price is $16,000 Cdn obo, please contact with any questions or serious offers. Thank you.

Trim Harley Davidson

2009 Ducati Super Sport 800

$5,990

San Jose, California

2000 Custom Rigid, To view this motorcycle in person visit Harley-Davidson San Jose, 1551 Parkmoor Ave., San Jose, CA 95128 or call our friendly Harley sales staff for any additional information at 408-998-1464. To view our complete inventory go to www.harleydavidsonsanjose.com Financing available on approved credit. Also, Extended service contracts available. Top dollar given for trades. No reasonable trade refused.

2010 Santee Rigid

$7,995

Mountain View, California

Cruiser, 54 cu. in. (883 cc) Engine, Comfortable Upright Riding Position, Powerful V-Twin Engine, Great Exhaust Sound!, Blacked Out Engine and Components, Clean Title, Safety Inspection and Oil Change Completed, 60 Day In House Warranty, Up to 3 year warranty available, Financing Options for Good, Bad, and No Credit!!!

2006 Bourget Dragon RIGID CHOPPER

$16,995

London, Kentucky

2010 Harley-Davidson FLHTK-Electra Glide Ultra Limited, H-D LED FRONT FENDER TIP LIGHT KIT $23.95 H-D SMOKED TURN SIGNAL LENSES $39.95 H-D BAR & SHIELD WINDSHIELD TRIM $84.95 H-D SPLIT VISION MIRRORS $129.95 H-D BATWING MINI-APE HANDLEBAR $194.95 H-D DIAMOND BACK CABLES/WIRING $565.55 H-D CHROME CLUTCH BRACKET & MASTER CYLINDER RESERVOIR KIT $399.95 H-D CHROME SWITCH HOUSING KIT $149.95 J&M PERFORMANCE SERIES FAIRING/TOUR-PAK SPEAKERS $389.98 H-D INNER FAIRING TRIM KIT $119.95 S.E. STAGE ONE AIR CLEANER KIT $159.95 H-D SCRIPT PASSENGER FOOTBOARD COVERS $64.95 H-D MID-FRAME AIR DEFLECTOR TRIM $59.95 VANCE & HINES POWER DUALS HEADER $549.95 RC COMPONENTS GATLIN ECLIPSE SLIP-ON MUFFLERS $579.00 H-D RIDER BACKREST/RIGID MOUNT $244.96 H-D DETACHABLE TOUR-PAK LUGGAGE CONVERSION KIT W/RELATED COMPONENTS $729.85 LABOR COST $1,440.00 TOTAL ACCESSORIES $5,927.74 H-D TRADE-IN SERVICE $419.98

Harley-Davidson : Other Rigid Bobber

$11,500

Valencia, California

This bike was built by the guys at Van Nuys Harley Davidson. It has a Bob Woods Cam, Kraft Tech Rigid Frame, Mikuni Carb, Primo Rivera Open Belt Drive, PM Brake system, this bike has literally less than 500 miles on it. Its garaged most of the time. Its fast and loud. It has no fuel guage, no speedometer, no blinkers. The brake light is all. It was a runner up for Easyrider magazine when built originally. Financial situation warrants me to sell. Serious buyers only please.

Trim NA

Harley-Davidson : Other 1954 harley davidson fl vintage panhead harley rigid frame used motorcycle

$26,500

Dayton, Ohio

1954 Harley-Davidson FL Vintage Panhead Harley Rigid Frame Used Motorcycle Full Rebuild, Lots of new parts! 12-volt upgrade! Less then 80 miles! Everything works as it should! NOTE: We sell WORLDWIDE however, motorcycle is for sale locally, therefore ad may end without notice.Buyer is responsible for picking up vehicle in Dayton, Ohio or we can assist with delivery and/or shipping however, any and all shipping fees will be the responsibility of the buyer. Vehicle will be released to buyer once funds have cleared our bank. We are a local licensed motor vehicle dealer in Ohio. Therefore, if buyer resides in Ohio, we must collect appropriate sales tax for their county. Also, if buyer resides in the following states we must collect sales tax as well. Arizona 6%, South Carolina 6%, California 6.25%, Florida 6%, Indiana 6%, Massachusetts 6.25%, Michigan 6%, and Washington 6.5%. If buyer resides outside these states no sales tax will be charged providing buyer shows proof of out of state address (ex: Drivers License). We will overnight title papers to buyer (once paid in full) for signature and will process title within 5 working days of receiving signed papers in return. We can also issue a temporary license plate if buyer needs, for an additional $18.50. PAYMENTWe accept and welcome PayPal for deposit only and Bank Finance or Cash for balance. NO cashiers checks or personal checks.SHIPPINGShipping is the responsibility of the buyer however, we can assist with pick up by shipping company.TERMS OF SALEThis vehicle has no warranty and we are selling it "AS-IS". No warranty expressed or implied. However, we guarantee everything works as it should at the time of this listing.ABOUT USAttention: We Are Adding More Items "Daily"... Please Visit Our eBay Store And Sign-Up For Our FREE Newsletter to Find Great Savings, Discounts, and Timely Deals. If You Need Hard To Find Harley-Davidson Accessories, Collectables, Antique Motorcycles, Parts, Clothing, Race Parts, Household Items, and more... Drop Us An Email With Your List And We'll Do Our Best For You. Mission Our entire business philosophy can be summed up in just a few, very important words; Satisfy the Customer. We have access to most any kind of part or accessory for any motorcycle! Whatever you're looking for, you'll find it FS-Worldwide! F&S was founded in 1961 by Gary Stolzenburg and Edgar Fuhr in Dayton, Ohio. The primary focus of the business was racing. Over the years, F&S has sponsored some great racers, and although the emphasis has been on flat track, F&S has been affiliated with every kind of two-wheeled racing. In 1979, Gary and his wife Mary purchased the Harley-Davidson franchise and have seen it grow steadily ever since. In March, 2011, Gary sold the franchise to concentrate on his racing efforts and hobby of collecting antique motorcycles and motorcycle memorabilia. Thank You So Much For Viewing Our Listing.CONTACT USSee our eBay store often as we are adding items daily! And, don’t forget to sign up for our newsletter!

Trim Rigid Frame Panhead

Harley-Davidson : Sportster 1974 harley davidson sportster ironhead chopper bobber custom rigid springer

$3,500

Oswego, New York

Badass chopper project!! $3500 cash... Located in NY (Oswego) for local pickup or will help with delivery! 1974 Harley Davidson Ironhead 1000cc hardtail chopper (1977 frame) with springer front end! Electric start brand new battery.... Long list of custom parts or original old school parts (all worth money) 16" ape hangers!It's a right side shift left side brake setupThis bike is done right just needs finishing Some but not all of the parts: Avon Venom tires (new front & rear)S&S Super E carb!Custom skull one of a kind ram air intakeHas had some misc engine work done16" black ops ape hangersElectric start setupFront & rear rotor brakesCustom skull points coverSkull leather engraved solo seatSpiked twisted metal sissy barAll bolts are spiked chrome(axle caps too)Hardtail frameSpringer front endSide mount license plate and tail lightFrame is powder coated black it's pretty long the bike is around 10ft long..I'm sure there's more I can't think of.. Needs: gas tank, oil tank, exhaust pipe, foot pegs and new gasket in the rocker box covers and realistically that's it, The motor runs and shifts and stops fine just needs finishing It's a sick bike turns lots of heads and worth way more finished!! Oswego NY area

Trim Ironhead chopper springer rigid

Custom Built Motorcycles : Chopper 1998 buell custombike with 1200 lightning engine trades also considered

$11,500

Gainesville, Florida

i have to relist this bike due to a non paying bidder - so from now on i will deny bids from ANY 0 feedback bidder if they don't contact me before placing a bid - ebay really should do something about these time wasters up for auction is this awesome custombike - this ist a beautiful built which was completed about 3 years back with a lot of details-building cost over 25K.The Frame is a Redneck rigid frame and is completely powdercoated as are the wheels and other parts of the bike.Rear Tire is 200/50-17 and front tire is 120/70-17 .The Bike is in like new condition,rides great awesome sound (not too loud)and the paintwork is absolutely beautiful.Just too much to list.Brakes,Engine,Front end is all Buell.Bike has a 1200 cc Lightning engine and it is fast .The Frame is a full size frame so even taller guys and girls will sit comftable.Bike is titled as a 98 Buell.If you like to make an offer please do so - worst i can say is no I will also consider trades for a classic car or a different bike (Harley only) This Bike is a garanteed show winner Good Luck and happy bidding a $ 500 non refundable deposit is due not later then 24 hours after auction ended - rest payment is due not later then 3 days after end of auction we ship nationwide and worldwide and help in any way we can with the arrangements

Trim BuellHarley DavidsonCustombike