Honda Xl350 Motorcycles for sale

1-15 of 59

Sort By

Honda : XR XL350 Powroll 403cc Megacycle Cam Al Baker's Pipe XL500 Mugen WORKS Shocks VMX

Honda : XR XL350 Powroll 403cc Megacycle Cam Al Baker's Pipe XL500 Mugen WORKS Shocks VMX

$1,995

Salem, Oregon

Year 1977

Make Honda

Model XR

Category Off Road Motorcycles

Engine 350

Posted Over 1 Month

FOR SALE 1977 HONDA XL350 We bought this bike a few years ago from a long time friend. This friend had owned this bike since 1985. Way back in 1985 he set off on a journey to create his own version of Bill Bell's Baja Bullet from the late 1970's. Clean and clear Oregon title. First off was the installation of a 403cc Powroll big bore kit. Also installed at that time was a mild Megacycle cam. While disassembled a brief clean up and smoothing out of the cylinder ports was done. Next was the fitting of a 1980 Honda XR500 carburetor. Well known for running great and good gas mileage. While the bike was apart the frame was cleaned up and any unneeded mounting hardware or tabbing for the OEM air filter box and battery stuff was neatly removed. Frame was professionally painted as Bob was pro-painter and owned his own auto body shop. At this time a custom "Mugen-like" air box was handmade and neatly installed/mounted on this bike. Bob is also a great fabricator. A new Al Baker's XR's Only exhaust pipe was purchased and installed. Still looks good. Sounds great! Header pipe has minor surface rust. While the rear end was apart the frame rails were custom modified for the installation of a at-the-time "modern" 1982 CR480 seat and rear fender section. Eliminating the big heavy XL350 seat and seat lock/helmet holder parts. All street-legal parts including: lights, wireharness, switches ETC were removed and are not included in the purchase of this bike. This bike could be made street legal again with time and effort finding the parts. We'd leave it just like it is though. A de-tabbed Honda XR500 rear swingarmwas mated up to the frame at this time as well. New mounts were made for the install of an UNKNOWN brand chain slider and chain guide. Both slider and guide are intact and in good used shape 1981-ish Honda XR500 front forks and clamps were installed. Increasing suspension travel and dampening. Custom steering stops were added to frame to make the new forks clear the then-new Clarke plastic tank. The Clarke tank now is a bit faded with some discoloration. Some of this fade disappears when you spray shiny stuff on it. We sprayed shiny stuff on it for the pics. You can see some of the stain on the sides though. Petcock currently functions fine. The vent tube nipple on the Clarke cap is broken. New caps are still avail from Clarke. In 1985, new Works Performance shocks were installed at that time too. Shocks are not leaking currently in 2016. Both seem to rebound and dampen nicely. Bike starts are runs well. Makes excellent power. Ideal for Vintage MX, trail riding or perhaps even flat tracking. Instant 2-3 gear wheelies on command. No clutch slipping needed. Brakes work decently well. Could probably use a good cleaning of the drums and shoes. Both still work OK and do not drag or stick when used. Shorty front brake lever decreased leverage and makes the cable pull harder than OEM. Front/rear tires are in good used shape. Mileage unknown. Front and rear rims are clean without dents or damage. Each wheel has 3-4 corroded spokes. Could be cleaned up and detailed with little effort. Front CR480 fender is faded but is not cracked. Rear CR480 fender is in good clean shape. Seat does not have any rips or tears. Foam feels nice and comfy. The aluminum Inter-Am handlebars are in good shape. After market controls work decently well also. The shorty clutch lever makes the clutch pull seem a bit firm. Throttle operates decently. The upper end of the throttle cable housing is separated from the end cap on the housing. Still works OK. Has a SUPER COOL solid aluminum exhaust valve cover with manual decompressor device built it. Cable is hooked up to a lever on the handlebar. All these parts work nicely. This bike was casually trail ridden in the Oregon coastal mountains for several years before being parked. Exact mileage on engine and performance parts is UNKNOWN. Mileage on the speedometer reads 9369. Bob said these meter was purchased at a local salvage yard though. Right before we purchased it Bob removed the top end to inspect for wear. All looked great and was reassembled with new gaskets. Bike starts and runs cleanly. No smoke. No unusual knocks, ticks or smoke, Transmission shifts smoothly. All kickstart parts operate properly too. This is an old bike with a lot of cool parts on it. Lots of time and effort was spent on this bike way back in 1985 to make it what it is. Bob is very meticulous. He was a auto-body paint shop owner and was also known to build custom tube-frames for sand rails. With a couple new fenders, number plates and perhaps that Bill Bell MR250 gas tank you would have quite the vintage racer!!!! Or simply ride and enjoy as-is. This bike does not have any remaining warranty. Sold as-is. With any 39 year old bike you will need to clean/replace/adjust/tune to your specific needs. If you have specific questions please ask them via the ebay message system. Yes we do ship anywhere in the USA 48 states !!!!We are Bill's Motorcycles Plus in Salem Oregon. Award winning, long time "real-deal" Gas-Gas and Husqvarna motorcycle dealer and riders. Oregon Dealer # DM0280.If you have questions please call toll free 1-888-806-1153 and ask for Bill Shipping and crating is available within the USA 48 states. Shipping to your local business with a fork lift or local shipping terminal approx. cost is $250-450 depending on your location and distance from us. Call or ask for shipping quotes, please include your zip code.Please no bidders below +5 current feedbacks. Any new members or zero feedbackers must please call us first to communicate interest and intent to complete payment in case they should win the auction. Zero feedbackers who do not do so will be blocked. On Jan-22-16 at 13:42:14 PST, seller added the following information: CLEAN AND CLEAR OREGON TITLE.

Trim XL350 Baja Bullet

Honda : Valkyrie 2014 honda valkyrie 1800 only 623 miles perfect one owner free shipping

Honda : Valkyrie 2014 honda valkyrie 1800 only 623 miles perfect one owner free shipping

$14,200

Cabot, Arkansas

Year 2014

Make Honda

Model Valkyrie

Category Cruiser Motorcycles

Engine 1832

Posted Over 1 Month

Listing by Auction123.com copyright Auction123, Inc.Bruno's Powersports - 9514 AJ Patton Road Cabot, AR 72023 - 501-605-12102014 HONDA VALKYRIEBEST PRICES ON EBAY! Click here for an XL view of the above Image PrevNext 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 DescriptionBasic InformationType: CruiserMileage: 633Title: ClearCondition: UsedTrim: BaseModel: ValkyrieMake: HondaYear: 2014Chassis & SuspensionFrame: AluminumFront Suspension Size (in): 1.8Front Suspension Size (mm): 45Front Suspension Type: Telescopic ForkNumber Rear Shock Absorbers: 1Rear Adjustable Shock / Spring Pre-LoadRear Suspension Brand Name: Pro ArmRear Suspension Material: AluminumRear Suspension Type: Single Sided Swing ArmComfortAdjustable LeversCruise ControlDigital InstrumentationTrip OdometerEngineBore (in): 2.92Bore (mm): 74Carburetion Type: Fuel InjectedCompression Ratio: 9.8:1Cooling System: LiquidCylinders: 6Engine Size (cc): 1832Engine Size (ci): 111.8Engine Stroke: 4-StrokeEngine Type: Horizontally OpposedFuel Capacity (gal): 6.1Fuel InjectorFuel Injector Size (mm): 40Fuel Type: GasStarter: ElectricStroke (in): 2.8Stroke (mm): 71Valve Configuration: SOHCValves: 12Valves Per Cylinder: 2BrakesFront Brake: Dual Hydraulic DiscFront Brake Diameter (in): 12.2Front Brake Diameter (mm): 310Rear Brake: Hydraulic DiscRear Brake Diameter (in): 12.4Rear Brake Diameter (mm): 316SpecificationsFront Tire (Full Spec): 130/60 R19Front Tire (Inches): 19Front Tire Aspect Ratio: 60Front Tire Width: 130Front Wheel Width (in): 3.5Fuel Capacity (liters): 23Rear Tire (Full Spec): 180/55 R17Rear Tire (Inches): 17Rear Tire Aspect Ratio: 55Rear Tire Width: 180Rear Wheel Width (in): 5Seat Height (inches): 28Wet Weight (kg): 340.2Wet Weight (lbs): 750Wheelbase (in): 67.2Wheelbase (mm): 1706.9Wheels Composition: AluminumSpeedometerTachometerDrivetrainNumber Of Speeds: 5Primary Drive (Rear Wheel): ShaftTransmission: ManualSafetyHeadlightFuel Level WarningRearview MirrorsTemperature WarningOther InformationDetachable Passenger SeatDrive Shaft GuardEngine Case GuardHard Side CasesHelmet StorageLockable StorageLower FairingUpper Fairing ContactPLEASE REMEMBER THE PRE-OWNED ITEM PICTURED IS WHAT YOU ARE BIDDING/BUYING AND ALL OTHER DETAILS AND AUCTION AGREEMENTS ARE LISTED HERE. TO THE BEST OF OUR KNOWLEDGE AND ABILITY WE TRY TO IDENTIFY ANY ISSUES OR CHANGES SO YOU KNOW EXACTLY WHAT YOU ARE BUYING SO THERE ARE NO SURPRISES. WE CANNOT GUARANTEE EXACT MODELS ON ANY ITEM SINCE PEOPLE FIX THEM UP WITH ACCESSORIES OFFERED IN THE AFTERMARKET WORLD. Bruno's Powersports 9514 AJ Patton Road Cabot, Arkansas 72023Ask for:Internet SalesMain:501-605-1210Email SellerEmail to FriendComplete and submit the form below to send a message to our dedicated sales team.* First Name:* Last Name:* Email:* Phone: Ext. Preferred Method:PhoneEmailMessage:Complete and submit the form below to send a link and your message to a friend.First Name:Last Name:* Your email:* Friend's email:We won't use this information for promotional purposes or disclose it to a third party.Message:GeneralDirectionsTerms BRUNOS POWERSPORTS, LLC "WHERE MOST DEALS ARE MADE WITH A SIMPLE PHONE CALL" A LICENSED, BONDED AND INSURED ARKANSAS POWERSPORTS DEALERSHIP. DESCRIPTION OF AUCTION ITEM: THIS IS A 2014 HONDA VALKYRIE 1800. THIS BIKE IS VIRTUALLY BRAND NEW WITH ONLY 623 MILES. THIS HAS THE SAME ENGINE AS A GOLDWING SO THIS ENGINE WILL LAST SEVERAL HUNDRED THOUSAND MILES IF YOU TAKE CARE OF IT. THIS IS ONE OF THE SHARPEST BEST HANDELING BIKES I HAVE BEEN ON. THIS BIKE RUNS OUT GREAT AND NEEDS NOTHING AT ALL. THIS IS AS NICE OF A BIKE AS YOU WILL EVER FIND AND WAS TRADED IN HERE LOCALLY. THIS BIKE HAS NO SCRATHCES OR ANYTHING ON IT AND IS AS CLEAN AS THE DAY IT WAS TAKEN OUT OF THE CRATE. THE BIKE SHIFTS OUT GREAT AND RUNS PERFECT WITH NO ISSUES. IF YOUR LOOKING FOR SOMETHING DIFFERENT THAT THE HARLEYS CANT KEEP UP WITH, WELL THIS IS YOUR BIKE. SHIPPING FREE SHIPPING WITHIN A 7-HOUR RADIUS OF OUR ADDRESS TO THE CLOSEST FREIGHT TERMINAL TO YOU OR OF YOUR CHOOSING. ANYTHING FURTHER IS A FLAT FEE OF $350.00 TO THE TERMINAL. TO LOCATE YOUR NEAREST FREIGHT TERMINAL CLICK THE LINK BELOW AND SELECT YOUR STATE TO SEE A LIST OF FREIGHT TERMINALS IN YOUR AREA. http://ltl.upsfreight.com/ProductsandServices/ServiceCenterDir/default.aspx ALL ITEMS ARE CRATED AND INSURED FROM OUR SHOP TO YOUR TERMINAL WITH THE HIGHEST AND BEST COVERAGE. USUALLY YOUR ITEM CAN BE AT THE NEAREST UPS TERMINAL IN LESS THAN ONE WORK WEEK ONCE PAYMENT HAS BEEN RECEIVED. HOWEVER DUE TO SHIPPING AREAS OR WEATHER, PLEASE ALLOW 2-4 WEEKS FOR DELIVERY OF YOUR UTV, SIDE-BY-SIDE, RANGER, MULE, RHINO, GATOR OR ANYTHING BIGGER THAN A STANDARD ATV TO THE UPS FREIGHT TERMINAL. WITH THESE LARGER ITEMS, WE ARE ONLY ABLE TO SHIP AS FAR AS THE UPS FREIGHT TERMINAL. YOU WILL BE RESPONSIBLE FOR MAKING YOUR OWN ARRANGEMENTS TO PICK-UP YOUR PURCHASE FROM THE UPS TERMINAL. ALL EXPORTERS WELCOME. WE CAN STORE, CRATE, AND FILL ANY ORDER AND CONTAINER FOR YOU. FINANCING IF YOU ARE LOOKING FOR A WAY TO GET THAT ITEM, FINANCING MAY BE AN OPTION. WE DO NOT OFFER FINANCING BUT WILL GLADLY HELP OUT. THIS IS WHAT YOU NEED TO DO: CHECK WITH YOUR LOCAL BANK OR CREDIT UNION. EVEN EBAY OFFERS GREAT FINANCING OPTIONS FOR ALL OF OUR PRODUCTS. WE WILL GLADLY GET YOU ANY PAPERWORK YOU WILL NEED TO GO THROUGH THIS PROCESS. INSPECTION OF WHAT YOUR BUYING WE HAVE QUALIFIED FULL-TIME MECHANICS ON STAFF TO REVIEW EVERY ITEM WE SELL. IF WE FIND SOMETHING WRONG WE EITHER FIX IT OR SELL AS-IS, AND LET YOU KNOW WHAT WE FOUND THAT MAY NEED TO BE FIXED TO MAKE IT A LIKE-NEW RIG. SOME PEOPLE CAN'T AFFORD TO BUY A PERFECT MACHINE OR PREFER TO PUT IN THEIR OWN "SWEAT EQUITY" WHICH MAKES BUYING A PRE-OWNED MACHINE ATTRACTIVE. WE CHECK BEARINGS, BRAKES, OIL COMPRESSION AND CHARGING SYSTEMS ON ALL ITEMS. OUR PRE-OWNED UNITS AND PARTS ARE AVAILABLE FOR INSPECTION AT OUR SHOP MONDAY THROUGH FRIDAY 9-5, AND SATURDAY BY APPOINTMENT. QUESTIONS ABOUT THE AUCTION FOR ANY QUESTIONS REGARDING THE AUCTIONS OR PAYMENTS, PLEASE CALL OUR STORE AT 501-605-1210 BETWEEN 9AM – 5PM CENTRAL TIME. DISCLAIMER ALL PRE-OWNED POWERSPORTS EQUIPMENT WILL HAVE SOME SCRATCHES AND FLAWS, NONE WILL BE PERFECT. TO THE BEST OF OUR ABILITY AND KNOWLEDGE, ANY ISSUE WE MAY HAVE IDENTIFIED DURING OUR INSPECTION, COSMETICALLY OR MECHANICALLY, WILL BE IN THE DESCRIPTION. HOWEVER, SINCE THESE UNITS ARE PRE-OWNED, WE MAY NOT BE ABLE TO IDENTIFY EVERY AND ALL DEFECT THAT MAY BE ASSOCIATED WITH THE UNIT. IF THIS MAY BE AN ISSUE FOR YOU, PLEASE DO NOT BID. IF YOU HAVE ANY ADDITIONAL QUESTIONS ABOUT OUR AUCTIONS NOT ANSWERED HERE, PLEASE GIVE US A CALL. FINAL NOTE: PLEASE UNDERSTAND THAT EVERYTHING WE SELL HAS BEEN ENJOYED BY SOMEONE ELSE AND IS USED. NOT ALL PEOPLE SEE CONDITION THE SAME. WE TRY OUR BEST TO DESCRIBE EVERYTHING TO THE BEST OF OUR ABITILITY. IF AN ISSUES ARRISES AFTER THE UNIT GETS HOME GIVE US A CALL TO TRY AND ASSIST YOU. PLEASE REMEMBER THESE ARE USED AND SOLD AS-IS. WE SELL THOUSANDS OF POWERSPORT UNITS AND DO OUR BEST TO PROVIDE YOU THE PRE-OWNED UNIT YOU ARE LOOKING FOR. THANK YOU FOR YOUR BUSINESS AND ENJOY YOUR NEW RIDE!!! THERE IS A $125.00 DOCUMENTATION FEE ON ALL ATV, UTV AND MOTORCYCLES. THIS IS NON NEGOTIABLE AND IS YOUR INSURANCE TO MAKE SURE YOU GET ALL THE PAPERWORK YOU NEED AND ANY OTHER HELP YOU MAY NEED AT THE REVENUE OFFICE Bruno's Powersports 9514 AJ Patton Road Cabot, Arkansas 72023 View DirectionsAsk For:Internet SalesMain:501-605-1210 Hours of Operation (CST):Mon-Fri09:00am-05:00pmSaturday09:00am-02:00pmPlacing a Bid: Your bid constitutes a legally binding contract to purchase this vehicle. Please do not bid if you're not seriously interested or financially able to purchase this vehicle. Bruno's Powersports reserves the right to, Obtain and verify the registered information of all users who bid on this auction. Cancel any and all bids at our discretion, or end the auction early if necessary.Bidders Age: You must be 18 years of age or older to Bid. Special eBay Bid Retraction Rules: If you place a bid before the last 12-hour period of the auction: You may retract that bid before that last 12-hour period but only for exceptional circumstances. You will not be allowed to retract that bid during the last 12-hour period of the auction. If you place a bid during the last 12-hour period of the auction: You will be allowed to retract the bid for exceptional circumstances but only if you do so within one hour after placing the bid.Methods of Payment: For any questions please or phone Hazelle at 501-605-1210 prior to bidding.Methods of payment include cashiers check, bank wire, money order or personal check. Any item paid with a personal check wil be held for 14 days. Buyers Inspection: Bruno's Powersports has done our best to disclose all information known about this vehicle for auction. Bruno's Powersports welcomes a buyers inspection. If you plan to have a buyers inspection, please make sure you inspect the vehicle prior to the auction ending. Inspection fees if any are Buyers responsibility. Representations and Warranties made by seller: This vehicle is being sold "as is". Manufacturer's warranties may still apply. No representations or warranties are made by seller, nor are any representations or warranties relied upon by bidders in making bids. Taxes and Registration fees: Out of state buyers are responsible for all state, county, city taxes and fees, as well as title service fees in the state that the vehicle will be registered. All taxes and fees must be paid in full in order for vehicle to be titled and registered. Title Information: Vehicle titles or Bill of Sale may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 30 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. If payment is made by cashier's or personal checks we will hold all titles for 14 days and until funds have cleared. Shipping & Delivery: All shipping charges are buyer's responsibility unless otherwise noted in a listing. For listings where Free Shipping is offered, Bruno's Powersports reserves the right to use UPS Freight services or another shipping service as specified. Should Buyer choose to use his/her own shipping service, free shipping offer is no longer offered as part of the listing. Bruno's Powersports will help with shipping arrangements but will not be responsible in any way for claims arising from shipping damage!When Buyer has selected and designated his/her own shipping, Bruno's Powersports assumes no responsibility for damages incurred after the vehicle leaves our showroom. Any shipping arrangements provided by Bruno's Powersports in these cases are as a courtesy. Any claims or other communication regarding shipment of vehicles will be between you and the shipper, not with Bruno's Powersports. The amount of time it takes for delivery is dependent on the carrier, but is generally 7-14 days from the date the vehicle is picked up from our facility until it is delivered to your destination. Verify with the shipper for an Estimate Time of Arrival to be sure. Finalizing your Purchase: An $80 documentation fee will be added to all final bids at the close of the auction. This fee is for all units, whether sold with a title or Bill of Sale only. This fee includes all work that is performed to ensure a unit is free and clear of any and all prior ownership before the unit is listed on eBay. Successful high bidder MUST communicate with Hazelle at Bruno's Powersports by or phone 501-605-1210 within 24 hours of the auction ending to make arrangements to complete their transaction. If we cannot confirm your intention to buy or the sale is not completed within 5 days, we reserve the right to relist this vehicle or sell to any other qualified buyer. In order to secure bid on vehicle, Successful bidder (BUYER) must within 24 hours of bid closing send to Seller a Deposit in the amount of 10% by bank certified funds if required. Within 72 hours of bid closing, Buyer must send balance of funds by bank wire transfer, cash in person, or bank certified funds to Seller. If Deposit is specified, at time of sending initial deposit, Buyer MUST fax copy of their State issued valid Driver License. Furthermore, before said vehicle is released for shipment to Buyer, all other Sale related and title related paperwork must be signed and returned complete to Seller. Auction123, Inc. (a service and listing/software company) and the Seller has done his/her best to disclose the equipment/condition of this vehicle/purchase. However, Auction123.com disclaims any warranty as to the accuracy or to the working condition of the vehicle/equipment listed. The purchaser or prospective purchaser should verify with the Seller the accuracy of all the information listed within this ad. Copyright © 2015 Auction123, Inc. - All Rights Reserved. Selling a Vehicle? Create Professional Listings Fast and Easy. Click Here! Image Hosting and Counters by: Auction123.com

Trim HONDA VALKYRIE

1973 Honda XL 350R

1973 Honda XL 350R

$2,000

Salt Lake City, Utah

Year 1973

Make Honda

Model XL 350R

Category -

Engine -

Posted Over 1 Month

Awesome bike! Runs well, brand new tires, custom seat/paint job, low miles. Fairly light weight but has a lot of power/sound. Street legal. Since it was just finished everything has been tuned up/ready to go. Clean title/title in hand. Open to trades/partial trades around the same size (250-350 size).

1974 Honda XL 350R

1974 Honda XL 350R

$2,199

Storm Lake, Iowa

Year 2017

Make Honda

Model CRF110F

Category -

Engine 109 cc cc

Posted Over 1 Month

Here’s one of the best parts about choosing an off-road motorcycle from Honda. You don’t have to pick one that’s too big, or one that’s too small. Because with a whole range of models, from mini to mighty, you’re sure to find one that’s just the perfect fit in terms of both size and performance. Take our CRF110F, for example. In terms of seat height and weight, it’s between our CRF125F and our CRF50F. And it offers a 110 cc air-cooled engine that’s super reliable and built to deliver the kind of power your young Red Rider needs. In addition, the CRF110F features both an effortless electric starter and a kick starter, as well. And it all teams up with our four-speed transmission with automatic clutch that’s been proven in thousands of bikes, so younger riders never have to worry about stalling or a handlebar-mounted clutch. The CRF110F is a great off-road, fun bike that younger riders are going to love. And, better than that, they’re going to remember all the fun they had riding it—and with you—for the rest of their lives.

1985 Honda XL 350R

1985 Honda XL 350R

$5,299

Nashville, Tennessee

Year 2015

Make Honda

Model CB500F ABS

Category -

Engine 471 cc cc

Posted Over 1 Month

A More Comfortable Sportbike. The innovative CB500F expands riding enthusiasts’ options with a modern and sporty 471 cc sportbike. This image-conscious offering not only carries a full load of attitude, it also delivers a gratifying level of performance and versatility. The CB500F has a classic riding position, a 30.9-inch seat height and plenty of room for a variety of riders. It’s an excellent choice for riders ready to move up a displacement class, or for anyone who appreciates a great middleweight motorcycle.

1975 Honda Xl 350R

1975 Honda Xl 350R

$11,500

Muscle Shoals, Alabama

Year 2005

Make Honda

Model Gold Wing 1800

Category Cruiser Motorcycles

Engine 1,800 cc

Posted Over 1 Month

2005 Honda Gold Wing 1800, 2 OWNER GARAGE KEPT. SOME CUSTOM PAINT. GPS mounted. trailer in pic is $500.00 extra. contact cel 256 412 4800. Will deliver within reason. $11,500.00 2564124800

1984 Honda Xl 350R

1984 Honda Xl 350R

$900

Saranac Lake, New York

Year 1984

Make Honda

Model Xl 350R

Category Dirt Bikes

Engine 350 cc

Posted Over 1 Month

1984 Honda Xl 350R, For sale is 1984 XL350 that'd Id like to get rid of. Starts and runs good. Could use a valve adjustment and valve seals (smokes and clacks) sometime but Im not going to put any $ into it being I want on/off road. Great rubber. Has it issues and needs TLC but for the price its a good buy. Get on it and go. $900.00

2016 Honda AFRICA TWIN DCT ABS

2016 Honda AFRICA TWIN DCT ABS

$2,000

Long Beach, California

Year 1976

Make Honda

Model XL 350R

Category -

Engine -

Posted Over 1 Month

She's been fun but I've got too many bikes now. About a year ago I did a top end rebuild, new tires, new chains. Runs great, ridden weekly, title in hand, already registered.

2014 Harley-Davidson FLHTK - Electra Glide Ultra Limited

2014 Harley-Davidson FLHTK - Electra Glide Ultra Limited

$6,500

Vonore, Tennessee

Year 1978

Make Honda

Model XL 350R

Category -

Engine -

Posted Over 1 Month

A true "Garage" find. 1978 XL350 with only 46 miles since new, it still has the nubs on the tires dated from 1978. Excellent like new condition. The bike was stored in a climate controlled garage and was barely ridden. More pictures on request.

2014 Honda Grom

2014 Honda Grom

$1,700

Madison, Alabama

Year 1975

Make Honda

Model Xl 350R

Category Dual Sport

Engine 350 cc

Posted Over 1 Month

1975 Honda Xl 350R, 1975 Honda 350XL, serial # XL350-2003849, color is Black with Red accents, mileage: 2047 miles. 1 family owner, used to run errands on farm in central Ohio- never raced. The motorcycle is complete and original as purchased, with exception of replacement air filter and passenger foot-pegs added to rear of bike. In overall good condition- very minor rust on various portions of frame; 1 small dent in right side of fuel tank, 1 crack to headlight plastic mount. Includes valid Ohio title, original owners' manual, original under-seat tool kit, 1 spare and 2 original keys. Last licensed for road use in 1988. Stored indoors since 1989, started/run regularly; fuel tank and carb cleaned/refurbed 2015. Original, unrestored condition- exterior condition is good, seat vinyl is good, engine is in good running condition, 5-speed transmission shifts smoothly up/down all 5 gears. Can send pictures/ video of it running as of 12/28/2015. Bike located near Mt. Sterling, Ohio, 25 miles south of Columbus, OH. History- 1 family motorcycle; -Purchased new by uncle in 1975, I purchased it from him in 1983. Driven 472 miles from 1983 until today. - Used by family to run errands on the family farm from 1975-1988, then intermittently since then- stored indoors from 1988-current - Motorcycle currently runs, I flushed the gas tank, filled with fresh gas last week (2015) and cleaned carburetor in Mar 2015. Asking $1,700.00 937-689-6493 email drummond93 at aol dot com

Honda : Other Honda XL 350 /FT 500

Honda : Other Honda XL 350 /FT 500

$1,500

Arlington, Texas

Year 1974

Make Honda

Model -

Category Dual Purpose Motorcycles

Engine 500

Posted Over 1 Month

1974 Honda XL 350 / FT500 Project mocked up 90% Complete. This bike has been modified with a FT 500 cc engine. All components work as they should. All Lights, Head, Tail, Instruments, Horn. Turn Signals, This bike has been converted to a Honda FT500 12Volt System. Tires are New. Chain and Sprockets are in good working order. Brakes are good, gas tank is Perfect (NEW) Seat is Perfect no tears. All Cables and Switches function as they should smooth and crisp. Has Brand New High Performance Carburetor and K&N Filter Extra and Spear Parts That Come With this Bike 3 Sets of Front Brake Shoes 2 Ignition Coils 1 Extra Starter Motor 1 Extra Set of Clutches 3 Spark Control Modules 2 Extra Ignition Control Modules. 3 Starter Controllers 1 Extra Dyno Coil 2 Extra Relays 1 Full set of Turn Signal Lens (4) 1 Extra 12 Volt Head Light 1 Full Set of Gaskets 1 FT 500 Honda Shop Manual 1 New Oil Filter 1 Extra 12 Volt Rectifier This Bike Will Need a New Battery, And No Title Bill of Sell Only I started this project about 9 years ago. I am no longer able to ride. This machine has been hand crafted. tracks straight down the road. I rode it about 3 years ago. I put 17 miles on during it's testing. and devolvement. Ran Very Strong!! Engine make no unusual sounds. and No Smoke. I have all these extra parts that I intended to have aroundso when I completed the bike I would all ready these hard to find parts for a FT 500 Honda Engine. But due to health reasons I must sell.

Trim XL

Honda : Other 1974 honda xl 350

Honda : Other 1974 honda xl 350

$3,450

Raleigh, North Carolina

Year 1974

Make Honda

Model -

Category -

Engine -

Posted Over 1 Month

Some of the hottest bikes on the vintage AHRMA scene are the four stroke old school thumpers. We are offering a very special bike which fits the vintage rider who is looking for low seat height, strong usable power and a truly classic look. This 1974 Honda 350 XL has been built to race motocross, scrambles, tt or flat track, truly a very capable bike in any of those types of races. Front forks are early Honda Elsinore and rear shocks are Works Performance. We just installed new custom exhaust with megaphone silencer, new clutch, new whirl pull throttle, new Mikuni carb, new air cleaner, wide pegs and new kill button all in the last two months. The bike was raced once by a slow 65 year old Vet rider, me! I certainly didn't come close to using the bikes potential, but the fun factor was off the charts. The bike pulls like a tractor, shifts smooth and handles surprising well for her age and weight. The tank and frame have been painted all white to give it a Mugen Honda look. The seat is solid, wheels and spokes are strong and true and the tires are in great shape. It is very seldom we say, this but this is a true race ready bike, just gas her up, put on your numbers and enjoy!

Honda : Other 1974 honda xl 350 vintage thumper xl 350 race ready vmx

Honda : Other 1974 honda xl 350 vintage thumper xl 350 race ready vmx

$3,450

Raleigh, North Carolina

Year 1974

Make Honda

Model -

Category -

Engine -

Posted Over 1 Month

Some of the hottest bikes on the vintage AHRMA scene are the four stroke old school thumpers. We are offering a very special bike which fits the vintage rider who is looking for low seat height, strong usable power and a truly classic look. This 1974 Honda 350 XL has been built to race motocross, scrambles, tt or flat track, truly a very capable bike in any of those types of races. Front forks are early Honda Elsinore and rear shocks are Works Performance. We just installed new custom exhaust with megaphone silencer, new clutch, new whirl pull throttle, new Mikuni carb, new air cleaner, wide pegs and new kill button all in the last two months. The bike was raced once by a slow 65 year old Vet rider, me! I certainly didn't come close to using the bikes potential, but the fun factor was off the charts. The bike pulls like a tractor, shifts smooth and handles surprising well for her age and weight. The tank and frame have been painted all white to give it a Mugen Honda look. The seat is solid, wheels and spokes are strong and true and the tires are in great shape. It is very seldom we say, this but this is a true race ready bike, just gas her up, put on your numbers and enjoy! Jim Weaver (919) 790-2235.

1974 Honda XL 350R

1974 Honda XL 350R

$11,099

Des Moines, Iowa

Category -

Engine -

Posted Over 1 Month

2016 Harley-Davidson XL1200V - Sportster Seventy-Two, Please contact NICK DAVENPORT in Internet Sales for more information! Please contact NICK DAVENPORT in Internet Sales for more information! Charcoal Denim on this slim fitting, nimble cruiser! What a great look-send us a note if you are curious about it. We will make it easy to do business with us, at Big Barn Harley Davidson! Please contact NICK DAVENPORT in Internet Sales for more information!

1985 Honda XL 350R

1985 Honda XL 350R

$16,000

Bristol, Connecticut

Year 2015

Make Harley-Davidson

Model BREAKOUT

Category -

Engine -

Posted Over 1 Month

2015 Harley Davidson Breakout FXSB Showroom Condition with over $4000.00 in accessories and still under warrantee. 103 cubic inch motor has a stage one kit with race tuner that was dyno'd at the dealership, Screaming Eagle Air Intake with Vance & Hines Big Radius Exhaust. Custom Harley Davidson parts also include the Day Maker LED head light with black trim ring, grips, all pegs, shifter and brake linkages, timing and primary covers, mirrors and levers, flush mounted gas cap, axle covers and more. This bike has over $23,000.00 invested into it. Please call 860-681-4009 anytime.