$25,000
Dimondale, Michigan
Category
Sport Bikes
Engine
998
Posted Over 1 Month
Contact: Ross Millwoode-mail: [email protected] Full Throttle Motorsports9555 Woodlane DriveDimondale, Michigan 48821(phone): 1-800-393-6686(phone): (517)646-9850(fax): (517)646-9840 The Vehicle: This is a BRAND NEW Kawasaki H2, that is still in the crate and has never even been sat on yet. Due to the original purchaser backing out because of an emergency, this has freed up an opportunity for you to make the purchase of a lifetime! This bike has a HUGE list of spec's and features that were inspired over years of innovation and excitement provided by Kawasaki, and comes with a laundry list of extras that include a letter of authenticity, a flash drive, a H2 shirt, a full service manual, 2 additional books on 30 years of Ninja innovation and inspiration, and a carbon fiber H2 key chain, just to name a few. PLEASE DO NOT HESITATE TO CONTACT ME WITH ANY QUESTIONS OR CONCERNS. THIS IS A 3 DAY LISTING DUE TO THE IMMEDIATE NEED TO SELL THE BIKE, SO PLEASE HAVE ALL FINANCES LINED UP BEFORE ATTEMPTING TO PURCHASE! BUYERS WITH LESS THAN 5 POSITIVE FEED-BACKS, OR WHO LIVE OUT THE COUNTRY THAT CLICK "Buy It Now" WITHOUT CONTACTING ME FIRST, WILL BE AUTOMATICALLY DECLINED AND THE BIKE WILL RE-LISTED IMMEDIATELY, AND YOU WILL BE CHARGED THE AUCTION FEE, SO PLEASE DO NOT WASTE MY TIME OR YOUR MONEY, IF YOU ARE SERIOUS, CONTACT ME. THIS BIKE IS 1 OF 240 IMPORTED TO THE UNITED STATES, THEY ARE NOT PLAQUED, SO IF ANYONE TELLS YOU THEY HAVE #_ OUT OF #_, DONT BELIEVE IT. WHAT YOU CAN BELIEVE IS YOU ARE TRULY THE OWNER OF A BIKE THAT ONLY HAS 239 TWINS IN THE STATES. All the special features and a review of the bike can be seen at totalmotorcylce.com, along with many other websites and forums, but here is a few snippets of what they had to say: Built Beyond Belief...The launching point for the development of the Ninja H2™ motorcycle was a strong desire to offer riders something they had never experienced before. Convinced that an extraordinary riding experience would not be found by merely building on the performance of existing models, the design team committed to developing the “ultimate motorcycle” from a clean slate.The bike needed to deliver intense acceleration and ultra-high top speed, coupled with supersport-level circuit performance. To realize this goal, help was enlisted from other companies within the Kawasaki Heavy Industries, Ltd (KHI) group, precipitating an unprecedented level of collaboration.Ninja H2 development pursued two paths. The first was the Ninja H2™R, which is a closed-course model that allowed the unadulterated pursuit of performance without the limitations of street homologation. This motorcycle is followed by the Ninja H2 street model, which is based closely on the H2R but meets all market regulations. The results are incredible, with both models offering a sensory experience surpassing anything else that riders can find today.A supercharged engine closely based on the same powerplant as the Ninja H2R powers the Ninja H2. High output notwithstanding, the compact design is on par with power units found in supersport liter-class models. The key to achieving this incredible performance lies in the supercharger – a motorcycle-specific unit designed completely in-house with technology from the Gas Turbine & Machinery Company, Aerospace Company and Corporate Technology Division. Designed to be the ultimate motorcycle, the street-going Ninja H2 is based closely on the closed-course Ninja H2R. Powered by a 200 PS supercharged engine, it offers intense acceleration, superb high-speed riding potential, supersport-level handling performance, and a sensory experience surpassing anything that riders can find today 2015 Kawasaki Ninja H2 Totalmotorcycle.com Key Features - Street model based on closed-circuit Ninja H2R- 998cc four-cylinder engine fitted with Kawasaki supercharger for intense acceleration- Supercharger uses planetary gears, spins at up to 130,000rpm and develops up to 20.5psi boost pressure- Dog-ring transmission allows fast shifting and works with standard quick shifter- Bodywork developed with Kawasaki Aerospace Company to generate downforce- Kawasaki River Mark used to indicate combined Kawasaki Group technology- Trellis frame used for first time to provide strength, controlled flex and air circulation- Single-sided swingarm used for first time, mounted to engine as a stressed member- KYB® AOS-II Air-Oil Separate cartridge fork, adjustable KYB rear shock- 330mm front discs with four-piston Brembo® calipers- Multi-mode traction control, launch control, engine braking control, ABS and a quick shifter2015 Kawasaki Ninja H2 Totalmotorcycle.com Features and BenefitsTHE QUEST FOR POWERIn order to offer intense acceleration, it was essential that the engine was able to produce big power. While a large-displacement engine could easily provide high output, the engineers preferred it to be compact to help ensure a lightweight, compact motorcycle.Using a supercharged engine enabled these engine design requirements to be met. Aside from minor differences in the engine, as well as an intake and exhaust system tailored for street use to meet noise and emissions standards, the supercharged engine is essentially the same as the closed-course Ninja H2R. It delivers intense acceleration unlike anything you can experience on a naturally aspirated bike. Designed in-house, the immense potential of the compact, highly efficientengine is a testament to the technology possessed by the KHI Group.SUPERCHARGED 998cc IN-LINE FOURKHI-DESIGNED SUPERCHARGERThe supercharger used by the Ninja H2 was designed by Kawasaki motorcycle engineers with assistance from other companies within the KHI Group, namely the Gas Turbine & Machinery Company, Aerospace Company, and Corporate Technology Division. Designing the supercharger completely in-house allowed it to be developed to perfectly match the engine characteristics of the Ninja H2. The highly efficient, motorcycle-specific supercharger was the key to achieving the maximum power and intense acceleration the engineers wanted. •One of the greatest benefits of designing the supercharger in-house and tailoring its design to match the character of the Ninja H2 engine was that engineers were able to achieve high-efficiency over a wide range of conditions – something that would not have been possible by simply using an aftermarket automotive supercharger. •The importance of high efficiency in a supercharger is so that, as air is compressed, power-robbing heat gain is minimal. And while many superchargers are able to offer high-efficiency operation in a limited range of conditions, the KHI-designed supercharger for the Ninja H2 offers high efficiency over a wide range of pressure ratios and flow rates – so it is over a wide range of engine- and vehicle speeds. This wide range of efficient operation (similar to having a wide powerband) translates into strong acceleration. •The supercharger’s high efficiency and minimal heat gain meant an intercooler was unnecessary, allowing savings in both weight and space. •The supercharger is a centrifugal-type unit – ideal for high-RPM performance – with a cast aluminium housing. •The unit is located centrally, behind the cylinder bank, in the best position to evenly distribute compressed air to all four cylinders. •The supercharger uses engine oil for lubrication. By not requiring an independent oil source, it contributed to the compact, lightweight design. •The supercharger is driven by a planetary gear train, which runs off the crankshaft. Designing the gear train using technology from Kawasaki’s Aerospace Company resulted in a compact unit with minimal power loss. •The gear train increases the impeller speed up to 9.2x the crank speed (1.15x step gear with an 8x planetary gear). This means at a maximum engine speed of approximately 14,000rpm, the impeller shaft is spinning at almost 130,000rpm. •The impeller is formed from a forged aluminium block using a 5-axis CNC machine to help ensure precision and durability. The 69mm impeller features six blades at the tip, expanding to 12 blades at the base. Grooves etched into the blade surfaces help direct the airflow. •The impeller’s pumping capacity is more than 200 liters/second (measured at atmospheric pressure), with intake air reaching speeds of up to 100m/s. After passing through the supercharger, air pressure is increased to as much as 2.4x atmospheric pressure (35psi). HIGH-TECH PAINTThe Kawasaki original silver mirror-like paint used on the Ninja H2 – known as Mirror Coated Black – was developed by Kawasaki specifically for motorcycles. The highly reflective surface adds to the bike’s stunning design. •In the shade, the paint appears black, but once in the sunlight its highly reflective surface takes on the appearance of the surrounding scenery. The stark difference in the way the paint appears in the light and shade emphasizes the beautiful curvature of the bike’s sculpted bodywork. •While this kind of paint is similar in appearance to what has been used by top custom builders, this is the first time it has been used on a mass-production vehicle in either the automotive or motorcycle industries. Strict Kawasaki quality control measures help to ensure a long-lasting finish. •The highly reflective surface is created by inducing a silver mirror-like reaction (a chemical reaction between a solution of silver ions and a reducing agent) that forms a layer of silver. This silver (Ag) layer is what creates the paint’s glass-like metal appearance. Compared to candy paints, which use aluminum flakes to generate a sparkling effect, the Ag layer appears as a uniform metallic surface. •In the shade the Ag layer is translucent, allowing the base coat color to show through. This gives the paint a deep, three-dimensional quality. •While the multiple layers of paint on typical production vehicles are applied by robot painters, each layer of the paint on the Ninja H2 – from primer to clearcoat – is carefully finished by hand by Kawasaki craftsmen to ensure a flawless, lustrous surface. Twice the layers of clearcoat (two on standard pieces, four on pieces with decals) adds to the high-quality finish. •The paint on the fuel tank is finished with a UV coat (the only layer where robot painters are used) to protect the tank’s brilliant finish. The Price: ONLY $25,000, plus, doc ($99.5), tax, title, and tag, which depending upon how the bike is purchased could be done through us or the responsibility of the purchaser. The document fee is the least the State of Michigan allows me to charge for all of the paperwork that is involved with the bike, this will be added no matter the arrangements for delivery or location of the customer.. THERE ARE NO ADDITIONAL FEES, SUCH AS FREIGHT AND SET-UP. Depending on state of residence, sales tax may also apply. MI residents must pay 6% sales tax. The purchaser is also responsible for any and all applicable local, county, state or federal taxes/fees that may apply including, but not limited to title, registration and plate fees. Terms: This vehicle is for sale locally in our dealership as well and the listing may be cancelled at any time pending sale online or in-store. Those wishing to finance must call me to submit a credit application and be pre-approved for financing BEFORE bidding on an item. Buyers with less than 5 positive feedbacks must contact me to make arrangements for payment and to assure me of your seriousness as a buyer before bidding on an item or making a purchase. A winning bid is considered a legally binding contract and the purchaser is responsible for the following terms: 1) A non-refundable partial payment of $500 is required IMMEDIATELY, 2) You must provide me with a valid e-mail address or fax# so that I can send receipts to be signed. I cannot proceed with the sale, remove the vehicle from the market or end the listing until those documents are signed and returned to me. NO EXCEPTIONS 3) Full Payment is due within 7 days of purchase. If full payment is not received within 7 days and you, the purchaser, have failed to make arrangements with me prior to the end of those 7 days, then the partial payment will be forfeited and the vehicle made available for sale once again. 4) Acceptable forms of payment are wire transfer (U.S. funds only), bank loan check, certified check or cash (in person when you pick up the vehicle.) If you pay by check then you must wait until the check clears before we can finalize the sale. 5) The purchaser must be able to provide me with 2 pieces of identification upon request. These policies are in place to protect you, the consumer and to prevent identity theft. Copies of identification sent MUST BE LEGIBLE. TRADE-INS: I can only give trade-in value if the vehicle is in my possession for a service inspection. ABSOLUTELY NO EXCEPTIONS. Feel free to e-mail me pictures of your trade-in but I will not attempt to assess value until the vehicle is here. ABOUT US: We are one of the largest Powersports dealerships in the nation. We carry a full line of motorcycles, ATVs, Utility Vehicles, Personal Watercraft, Scooters, Mopeds and generators. We are open Monday thru Friday from 9:30 a.m. until 6:30 p.m. and Saturday from 9:30 a.m. until 4:30pm. FINANCING: Financing is available upon approved credit. In accordance with Federal Law, you must be able to come into our dealership in person with 2 pieces of acceptable identification to sign the paperwork if we do the financing. You must call me at 1-800-393-6686 to fill out a credit application prior to purchasing. LOCATION: We are located on the west side of Lansing, Michigan and are easy to find off of I-96 (exit 98B), I-69 (exit 70), Interstates 496 and 127. Contact: Ross Millwoode-mail: [email protected] Throttle Motorsports9555 Woodlane DriveDimondale, Michigan 48821(phone): 1-800-393-6686(phone): (517)646-9850(fax): (517)646-9840
Trim H2
